Mahidra TUV 300 Owner's Manual page 90

FEATURES AND CONTROL
8.5.6 Head Lamp Flash
Pull the lighting control stalk (from the head lamp low beam
position) towards the steering wheel to instantaneously flash the
head lamp high beam. The head lamp flash works even when the
head lamp is OFF.
8.5.7 Head Lamp Leveling System
When the vehicle is either fully or partially loaded, it may have an
upward inclination disturbing the head lamp aiming. A correct head
lamp setting provides good visibility to the driver with minimum
inconvenience to other road users.
To properly aim the head lamp beam, use the head lamp leveling
switch. This switch is located on the right side of the steering
column shroud in the instrument panel. This switch has three
positions marked as 0, 1 & 2.
8-8
U42H14
Select the suitable switch position depending on the pay load as
advised in the table.
Switch
Vehicle Loading Condition
Position
Driver only or Driver with front passenger
0
Driver + Front passenger + Rear seat occupied
1
All seats occupied
2
All seats occupied with luggage OR Driver with luggage at
3
extreme rear side
The headlights can only be adjusted when the low beam is
switched ON.
O
R
L
U42H15
© Copyright Mahindra & Mahindra Ltd.082015