Mahidra TUV 300 Owner's Manual page 148

HEATING, VENTILATION AND AIR-CONDITIONING SYSTEM (HVAC)
10.12.2 Rear Windshield De-mist (if equipped)
The rear windshield glass de —mist button is located in the switch
bank on the instrument panel RHS of steering, adjacent to the head
lamp leveling switch. Press the button once to activate the de-
mister. The LED on the button illuminates upon activation and the
de-mister heats the rear windshield clearing the fog. Switch OFF the
de-mister by pressing the button again as soon as the fog is
cleared.
The rear windshield de — mister switches OFF automatically
after a pre-defined time.
10-10
O
R
L
U42K11
10.12.3 HVAC Points to Remember
• For quickly clearing the misted/fogged/frosted-up windshield,
set the blower speed to maximum. For quick defrosting, set the
temperature to extreme hot
• Once the windshield is cleared, keeping the air conditioner ON
leads to dehumidified cabin heating/cooling which helps in
keeping windshields and windows clear. Keep the fresh air mode
selected. If required, re-adjust the blower speed and
temperature control knob to maintain comfort. The temperature
of air coming out of the vents should neither be too hot nor too
cold
• Driving the vehicle for long with the air conditioner switched off
may lead to windshield or windows getting misted/fogged up
• Driving the vehicle for long continuously in the recirculation mode
may lead to windshield or windows getting misted/fogged up
• Do not blow cold air on the windshield and windows for long
during humid weather. It could make windshield/windows mist/
fog-up
• When on a long drive during warm humid/rainy weather, once
cabin temperature becomes comfortable, shift to 'A/C ECO'
mode, if using 'A/C ' mode earlier. Adjust the temperature knob
such that air coming out of the vents is not too cold. Keep the
fresh air intake mode selected. Shift to any distribution mode
other than defrost mode. This will help in keeping windshields
and windows clear
© Copyright Mahindra & Mahindra Ltd.082015