Mahidra TUV 300 Owner's Manual page 91

8.5.8 Power ECO Switch
Power economy switch helps you to improve the fuel efficiency of
the vehicle. It is located on the driver panel next to the Head lamp
levelling switch
Press the switch gently once to switch between modes. The ECO
mode is indicated by LED illumination in the switch.
Power or Economy mode can be changed at any time in vehicle
running condition. Select the suitable mode depending on the
requirement.
If the vehicle is in ECO mode, when engine is switched off and
restarted, still vehicle will be in ECO mode. ECO ON or OFF is
indicated by the light in the ECO mode button.
© Copyright Mahindra & Mahindra Ltd. 082015
O
L R
U42H56
8.5.9 Hazard on Panic Braking
Hazard Lamps are turned ON during panic braking for 5 sec when
the following conditions are met;
• Ignition is ON
•
• Vehicle speed is greater than 100 kmph
• Brake is applied
• Sudden High deceleration Rate
8.5.10 Static Bending Lamps (if equipped)
Static bending lamps are integrated in both the head lamps. Static
bending lamps turn ON when a sharp turn is taken. They help in
illuminating the road in the direction of turn.
FEATURES AND CONTROL
U42H58 U42H15
8-9