Mahidra TUV 300 Owner's Manual page 149

• For defogging/de-misting/defrosting the side windows at the
front, select either Face or Face-Foot mode while directing air
flow towards windows by adjusting the louvers of side vents. All
other settings should be kept same as advised for windshield
defogging/de-misting/defrosting
• For heating the vehicle interior while windshield defogging/de-
misting/defrosting, select the Foot-Defrost mode. All other
settings should be kept same as advised for windshield
defogging/de-misting/defrosting
• For quickly defogging/de-misting/defrosting the outside of the
windshield, it is advisable to operate the windshield wiper/
washer for a few times intermittently
• If snow has deposited on the windshield, use an ice scraper to
remove the ice deposited before using the wiper
• In freezing weather, warm the windshield with the defroster
before using the windshield washer. Also use a washer fluid with
© Copyright Mahindra & Mahindra Ltd. 082015
HEATING, VENTILATION AND AIR-CONDITIONING SYSTEM (HVAC)
anti-freezing properties. This will help prevent the washer fluid
from freezing on your windshield
• A dirty/contaminated windshield would make misting/fogging
worse. Always keep the inside and outside of the windshield
clean
• Reduced air flow because of a clogged HVAC filter or any other
obstructions in the air flow path may lead to in-adequate
defogging/de-misting/defrosting performance. If the air flow
seems to have considerably reduced, get the filter cleaned/
replaced immediately. The air flow path should be kept free of
obstructions
• Reduced cooling performance from the air conditioner may lead
to inadequate defogging/de-misting/defrosting. If the cooling
effect seems to have dropped considerably, get the air
conditioning system checked by an Authorized Mahindra Dealer
10-11