Step Two Of System Option Programming; Setting The Date And Time - Sam4s ER-150II Programming & Operation Manual

Step Two of System Option Programming

N1 N2
Digit
N1 GRAND TOTAL TO
PRINT
N2 GRAND TOTAL TO
RESET WITH Z
REPORT
N3 Z COUNTER TO
RESET WITH Z
REPORT
N4 TRANSACTION
NUMBER TO RESET
WITH Z REPORT
N5 PRINT DATE ON
RECEIPT (JOURNAL)

Setting the Date and Time

The clock automatically advances the date and prints the current date and
time on the paper. To set the date and time:
1. Turn the mode switch to the X position.
2. Enter the date in six-digit format (MM DD YY) and press the
CH key.
M
3. Enter the time in four-digit military time format (i.e. 15:00 is
3:00 PM). Press the CH key.
1
N3 N4
Option
M D
5 0
N5 PO
Value = 0
PRINT
NOT RESET
NOT RESET
NOT RESET
PRINT
D Y
0 CH
VALUE = 1
NOT PRINT
RESET
RESET
RESET
NOT PRINT
Y CH
21