Table of Contents
Advertisement
To remove the left expansion card riser blank:
1.
Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
2.
Open the system.
3.
Slide the left riser blank to the left pressing on the metal tab.
4.
Lift the riser blank up and away from the system.
Store the riser blank for future use.
Figure 29. Removing and Installing The Left/Right Expansion Card Riser Blank
1.
system chassis
3.
PCI retention rocker
Installing The Left Expansion Card Riser Blank
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
1.
Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
2.
Open the system.
2.
left riser blank
4.
right riser blank
67
Advertisement
Table of Contents
Troubleshooting
