Mitel Single-Line User Manual page 26

When you enable Personal Call Routing, your incoming calls are routed as specified by the
routing type programmed for you by your system administrator. The table below provides
descriptions for the default routing types.
Routing Type
Mobile Twinning
Delayed Mobile
Twinning
Check with your system administrator to see which routing type has been programmed for you.
Your administrator can modify these routing types by adding or removing routing steps, adding
or removing destinations, and changing the ring timers, if required.
To ensure that calls are routed correctly to your mobile and home phones, inform your system
administrator if either of these phone numbers change.
To enable Personal Call Routing:
1.
2.
To disable Personal Call Routing:
1.
2.
To answer a call routed to your mobile or home phone:
1. Answer the call when it rings your phone. After you speak, the Personal Call Routing
2. Do one of the following:
To use the Personal Call Routing – Handoff "push" feature:
1. While on an active call at your phone, perform a hookflash, and then dial 388. The call
2. Answer the call at one of your associated destinations. For mobile and home phones,
To use the Personal Call Routing – Handoff "pull" feature:
NOTE
To cancel the Personal Call Routing – Handoff feature:
Mitel ® Single-Line Phone User Guide – Issue 13, September 2009
Calls simultaneously ring your desk phone and mobile phone, before
going to voice mail.
Calls ring your desk phone first, and then ring both your desk phone and
mobile phone, before going to voice mail.
Lift the handset, and then dial 363 or 364.
Hang up.
Lift the handset, and then dial 362 or 364.
Hang up.
prompt is played.
•
Press # to accept the call.
You do not need to wait for the prompt to accept the call. You can
NOTE
accept the call immediately by pressing the # button.
•
Press * to send the call to the voice mailbox associated with your main extension
(not your mobile phone or home phone voice mailbox). If you do not have a voice
mailbox, the "Press *..." prompt is not played and the call is routed to your main
extension.
If you hang up, the call continues to follow your programmed routing steps.
rings all of your associated destinations (except voice mail).
press # to accept the call.
While on an active call on an associated destination device, lift the phone handset and
dial 388. A confirmation tone is played and the call is pulled back to your phone.
If you enter the handoff feature code (388) and hear reorder tone, the call cannot be
handed off.
While the handoff is in-progress, perform a hookflash, and then dial 388.
Description
Call Features
Page 15