Completing The Installation; Section 2.6, "Completing The Installation - LSI 320 User Manual

2.6 Completing the Installation

Before replacing the cover on your computer, complete the checklist as
.
shown in Table 2.2
Table 2.2 Host Adapter Installation Check List
Verify Installation Procedures
Host adapter connection in PCI-X bus slot is secure (level)
Internal SCSI bus connections are secure (pin-1 continuity)
External SCSI bus connections are secure
Proper SCSI bus termination established
Unique SCSI IDs set and recorded for each device
After you verify all items on the checklist, follow these steps:
Step 1. Replace the cabinet cover on your computer.
Step 2. Plug in all power cords, and turn on power to all devices and
your computer.
Step 3. Wait for your computer to boot up.
Note: To change default configurations of the Ultra320 SCSI host
adapters, refer to the Fusion-MPT™ Device Management
System User's Guide.
Completing the Installation
Copyright © 2002 by LSI Logic Corporation. All rights reserved.
Done
2-13