Table of Contents
Advertisement
2.1
Requirements
Chapter 2
MegaRAID 8480
Hardware Installation
This chapter describes the procedures used to install the MegaRAID
8480 Storage Adapter. It consists of the following sections:
•
Section 2.1, "Requirements"
•
Section 2.2, "Quick Installation"
•
Section 2.3, "Detailed Installation"
•
Section 2.4, "SAS Device Cables"
•
Section 2.5, "Replacing a Failed Controller Containing Data in the
LSIiTBBU02"
•
Section 2.6, "After Installing the Storage Adapter"
The following items are required for installation:
•
A MegaRAID 8480 RAID Controller
•
A host system with an available PCI Express expansion slot
•
The MegaRAID 8480 CD, containing the drivers and documentation
•
The necessary internal and/or external cables
•
SAS or SATA II physical disks
Note:
LSI strongly recommends using an uninterruptible power
supply (UPS).
MegaRAID 8480 Storage Adapter User's Guide
Copyright © 2006-2007 by LSI Corporation. All rights reserved.
2-1
Advertisement
Table of Contents
