Shielded cables for SCSI connection external to the cabinet are used in the compliance testing of this Product. LSI Logic is not responsible for any radio or television interference caused by unauthorized modification of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by LSI Logic.
Page 3
LSI Logic; nor does the purchase or use of a product from LSI Logic convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual property rights of LSI Logic or third parties.
Page 5
Preface This document is the user’s guide for all LSI Logic Ultra320 SCSI to PCI-X Host Adapters. It contains a functional description of the Ultra320 SCSI host adapters as well as physical and electrical specifications. It also contains instructions for installing the host adapters and for connecting SCSI devices to them.
Installing any of these adapters in your PCI or PCI-X system allows you to connect up to 15 SCSI devices per channel over a SCSI bus. You can use the Ultra320 SCSI host adapters in PCI-X computer systems with a standard bracket type.
If you prefer more detailed instructions and guidance, refer to SCSI Host Adapter,” page To install an Ultra320 SCSI to PCI-X host adapter, follow these steps: Step 1. Turn off and unplug the computer. Warning: Step 2.
Chapter 2 Detailed Host Adapter Installation This chapter provides detailed instructions on how to install the LSI Logic Ultra320 SCSI to PCI-X host adapters and includes these topics: Section 2.1, “Installing your Ultra320 SCSI Host Adapter,” page 2-1 Section 2.2, “SCSI Device Cables,” page 2-4 Section 2.3, “Connecting SCSI Devices,”...
Caution: Step 4. Remove your Ultra320 SCSI host adapter from its packaging Figure 2.1 LSI21320 Ultra320 SCSI host adapters are different in design and size. Refer to more details. Figure 2.1 Channel B 68-Pin External VHDCI SCSI J3 Connector Channel A...
2.1.2 Inserting the Host Adapter Perform the following steps to install your Ultra320 SCSI host adapter in the PC mainboard. Step 1. Remove the blank bracket panel on the back of the computer Step 2. Carefully insert the edge connector J1 of the host adapter into Figure 2.2...
Step 4. Be sure to tighten the bracket screw into the bracket securely 2.2 SCSI Device Cables For reliable Ultra320 operation, be sure to use an Ultra320 rated SCSI cable. The Ultra320 SCSI cable also has built-in low voltage differential and single-ended termination.
This section provides step-by-step instructions for connecting internal SCSI devices. The figures show the LSI22320 host adapter, which has two internal connectors and two external connectors. Other Ultra320 SCSI host adapter models have different numbers of connectors. Refer Section 2.2.1, “Internal SCSI Cables,” page 2-4 internal cables.
SCSI ribbon cable to it. can connect other devices if the cable has more connectors. The Ultra320 SCSI host adapters support up to 15 SCSI devices connected to each SCSI channel. Step 4. Be sure that termination is enabled at the end of the cable that is farthest away from the SCSI host adapter.
Typically, you set the SCSI ID of the SCSI device with jumpers or with a switch on the device. You must not duplicate SCSI IDs on a SCSI bus. LSI Logic recommends that you record the SCSI IDs of all SCSI devices. Table 2.1 Table 2.1...
Channel LSI20320 Single Channel Ultra320 SCSI Standard LSI20320-R Single Channel Ultra320 SCSI Standard LSI20320L Single Channel Ultra320 SCSI Low Profile 6.6 x 2.53 inches, 167.6 x 64.3 mm LSI20320H Single Channel Ultra320 SCSI Standard LSI21320 Dual Channel Ultra320 SCSI LSI21320-R...
3.1.1 LSI20320 Single Channel Host Adapters The LSI20320, LSI20320-R, LSI20320L and LSI20320H are single channel Ultra320 SCSI to PCI-X host adapters that provide one Ultra320 SCSI channel. The SCSI Channel A interface for the LSI20320, LSI20320-R and LSI20320L is made through connectors J1 and J3. See Figure 3.1...
3.1.2 LSI21320 Dual Channel Host Adapters The LSI Logic LSI21320 and LSI21320-R are dual channel Ultra320 SCSI to PCI-X host adapters that provide two Ultra320 SCSI channels. The SCSI Channel A interface is made through connectors J2 and J4. The SCSI Channel B interface is made through connector J3. See Figure 3.3...
3.1.3 LSI22320 Dual Channel Host Adapters The LSI Logic LSI22320 and LSI22320-R are dual channel Ultra320 SCSI to PCI-X host adapters that provide two Ultra320 SCSI channels. The SCSI Channel A interface is made through connectors J2 and J6. The SCSI Channel B interface is made through connectors J3 and J4.
Fusion-MPT architecture that allows for thinner drivers and better performance. 3.3 Technical Specifications The design and implementation of the Ultra320 SCSI host adapters minimize electromagnetic emissions, susceptibility to radio frequency energy, and the effects of electrostatic discharge. The adapter carries the CE mark, C-Tick mark, FCC Self-Certification logo, Canadian...
5% to 90% noncondensing 3.3.3 Safety Characteristics All Ultra320 SCSI host adapters meet or exceed the requirements of UL flammability rating 94 V0. Each bare board is also marked with the supplier’s name or trademark, type, and UL flammability rating. Because these boards are installed in a PCI bus slot, all voltages are below the SELV 42.4 V limit.
The electrical connection required at each end of the SCSI bus, Termination composed of active voltage regulation and a set of termination resistors. Ultra SCSI, Ultra2 SCSI, Ultra160 SCSI, and Ultra320 SCSI require active termination. BIOS Basic Input/Output System. Software that provides basic read/write capability.
Page 41
SureLINK The domain validation method developed and used by LSI Logic. SureLINK provides three levels of integrity checking: Basic (level 1), Enhanced (level 2), and Margined (level 3). Ultra SCSI A standard for SCSI data transfers. It allows a transfer rate of up to 20 Mbytes/s over an 8-bit SCSI bus and up to 40 Mbytes/s over a 16-bit SCSI bus.
Page 44
Reader’s Comments Fax your comments to: Please tell us how you rate this document: Ultra320 SCSI to PCI-X Host Adapters User’s Guide. Place a check mark in the appropriate blank for each category. Completeness of information Clarity of information Ease of finding information...
Page 45
You can find a current list of our U.S. distributors, international distributors, and sales offices and design resource centers on our web site at http://www.lsilogic.com/contacts/index.html...