Installing Your Ultra320 Scsi Host Adapter; Selecting A Pci Slot - LSI 320 User Manual

2.1 Installing your Ultra320 SCSI Host Adapter

2.1.1 Selecting a PCI Slot

Chapter 2
Detailed Host Adapter
Installation
This chapter provides detailed instructions on how to install the LSI Logic
Ultra320 SCSI to PCI-X host adapter boards and includes these topics:
Section 2.1, "Installing your Ultra320 SCSI Host Adapter," page 2-1
Section 2.2, "SCSI Device Cables," page 2-4
Section 2.3, "Connecting SCSI Devices," page 2-6
Section 2.4, "Terminating the SCSI Bus," page 2-11
Section 2.5, "Setting SCSI IDs," page 2-12
Section 2.6, "Completing the Installation," page 2-13
This section provides detailed instructions for installing your host adapter
board and connecting your SCSI devices to it. The following illustrations
show the LSI22320-R Dual Channel Ultra320 SCSI Host Adapter.
However, these illustrations apply to all boards. For more information
about all the Ultra320 SCSI Host Adapters, refer to
SCSI Host Adapter Board Characteristics."
Step 1. Turn off and unplug your computer
Warning: Be sure to disconnect the computer's power before you
remove the cover and install the Ultra320 SCSI host
adapter.
Step 2. Open your computer cabinet by removing its cover.
Ultra320 SCSI to PCI-X Host Adapters
Copyright © 2002 by LSI Logic Corporation. All rights reserved.
Chapter 3, "Ultra320
2-1