Obtaining Windows Nt/Windows 2000 Drivers; Quick Host Adapter Installation Procedure - LSI ITI7004G2- User Manual

1.2 Obtaining Windows NT/Windows 2000 Drivers

1.3 Quick Host Adapter Installation Procedure

1-2
to PCI boards in PCI computer systems with either a standard or Low
Profile PCI (LPPCI) bracket type.
Before you begin the 2 Gbit/s Fibre Channel to PCI host adapter
installation, create a Windows NT or Windows 2000 driver diskette by
copying the driver files from either the LSI Logic SDMS CD-ROM or from
the LSI Logic web site at http://www.lsilogic.com. If you obtain
the driver software from the LSI Logic web site, the zipped package that
you download contains the appropriate files. To obtain the driver software
from the Fusion-MPT™ (Message Passing Technology) Software Device
Drivers and Utilities CD-ROM, copy all the files starting from the I386
subdirectory through the MINIPORT subdirectory
(I386/WINNT/MINIPORT) to the root directory of a clean diskette. You
will use the driver diskette during installation process.
Contact the LSI Logic technical support team for LSI Logic Storage I/O
Components if you have any questions. In the U.S., customers may
contact us at (719) 533-7230.
This section provides an overview of the installation procedure. If you are
an experienced computer user with prior host adapter installation and FC
setup experience, this section may sufficiently describe the procedure for
you. If you prefer more detailed instructions for installing the host
adapter, proceed to
For safe and proper installation, check the user's manual supplied with
your computer and perform the following steps.
Step 1. Ground yourself before removing this host adapter board from
the packaging.
Step 2. Remove the host adapter from the packaging and check that it
is not damaged.
Installing the 2 Gbit/s Host Adapters
Rev. 2.0 Copyright © 2002 by LSI Logic Corporation. All rights reserved.
Section 1.4, "Detailed Installation Procedure."