Connecting Multiple External Scsi Devices - LSI 320 User Manual

2-10
Step 3. Connect any additional SCSI devices to one another with
shielded external SCSI cables. You will need a separate SCSI
cable for each additional device.
Figure 2.10
devices.
Figure 2.10 Connecting Multiple External SCSI Devices
Enable
termination
on the device
at the end of
the bus.
Step 4. Be sure that termination is enabled on the last external SCSI
device as shown in
the SCSI Bus," page 2-11
termination.
Detailed Host Adapter Installation
Copyright © 2002 by LSI Logic Corporation. All rights reserved.
shows how to connect multiple external SCSI
Figure 2.10. See
for more information about SCSI bus
Disable
termination
on all devices
not at the end
of the bus.
Host Adapter
Automatically
Terminated
Section 2.4, "Terminating