Lsi 12Gb/S Sas Hba Certifications And Safety Characteristics; Hardware Detailed Installation Instructions - LSI SAS 9300-8i User Manual

LSI SAS 9300-8i PCI Express to 12Gb/s SAS Host Bus Adapter User Guide
March 2013
The following limits define the storage and transit environment for the LSI 12Gb/s SAS HBA:
Temperature range: –45 °C to +105 °C (–49 °F to +221 °F) (dry bulb)

Relative humidity range: 5% to 90% noncondensing

6

LSI 12Gb/s SAS HBA Certifications and Safety Characteristics

All LSI 12Gb/s SAS HBAs meet or exceed the requirements of UL flammability rating 94V-0. Each bare board is marked
with the supplier's name or trademark, type, and UL flammability rating. Because these boards are installed in a PCIe
bus slot, all voltages are less than the SELV 42.4-V limit.
The design and implementation of the LSI 12Gb/s SAS HBA minimizes electromagnetic emissions, susceptibility to
radio frequency energy, and the effects of electrostatic discharge.
The LSI 12Gb/s SAS HBA meets the following integrated electromagnetic interference (EMI) compliance labels:
CE mark

CISPR Class B

C-Tick mark

Canadian Compliance Statement

FCC Class B, marked with the FCC Self-Certification logo

Japan VCCI

Korean KCC

Taiwan BSMI

The LSI 12Gb/s SAS HBA meets the following environmental directives:
RoHS

WEEE

7

Hardware Detailed Installation Instructions

To install the LSI 12Gb/s SAS HBA, follow these steps:
1. Unpack the HBA, and inspect it for damage. Unpack the HBA in a static-free environment. Remove the HBA
from the antistatic bag, and carefully inspect the device for damage. If you notice any damage, contact LSI or your
reseller support representative.
2. Prepare the computer. Turn off the computer, and disconnect the power cord from the rear of the power supply.
3. Remove the cover from the chassis.
4. Check the mounting bracket on the HBA (system dependent). If required for your system, replace the
full-height mounting bracket that ships on the HBA with the low-profile bracket supplied.
ATTENTION To avoid the risk of data loss, make a backup of your data before
changing your system configuration.
CAUTION Disconnect the computer from the power supply and from any
networks to which you will install the HBA, or you risk damaging the
system or electrical shock.
LSI Corporation
- 7 -
LSI 12Gb/s SAS HBA Certifications and Safety Characteristics
Thermal and Atmospheric Limits