Kemppi FastMig MXP 37 Pipe Steel Operating Manual page 13

Al, (Fc, Mc, Ss, Fe)
U-groove
Wire feed rolls, metal
Fe, Ss,
(Al, Mc, Fc)
V-groove
Fc, Mc, (Fe)
V-groove, knurled
Al, (Fc, Mc, Ss, Fe)
U-groove
Mount the lower feed roll, ensuring that the pin on the shaft fits in the cut on the feed roll.
NOTE!
© Kemppi Oy / 1515
1.0 W001067
1.2 W001069
1.6 W001071
ø mm lower
0.8 – 0.9 W006074
1.0 W006076
1.2 W004754
1.4 W006078
1.0 W006080
1.2 W006082
1.4 – 1.6 W006084
2.0 W006086
1.0 W006088
1.2 W006090
1.6 W006092
W001068
W001070
W001072
upper
W006075
W006077
W004753
W006079
W006081
W006083
W006085
W006087
W006089
W006091
W006093
EN
11