Standalone Configuration; Static Color Mode; Auto Program Mode; Program Speed - Chauvet SlimPAR HEX 6 IRC User Manual

Standalone
Configuration

Static Color Mode

Auto Program
Mode

Program Speed

Page 15 of 24
Use standalone configurations to operate the product without a DMX controller. There are a variety
of standalone modes and they are powerful tools for making exciting looks.
Never connect a product operating in a standalone mode (Sound-Active, Auto Program, or
Infrared) to a DMX chain that includes a DMX controller. Products in a standalone mode can
transmit DMX signals that interfere with the DMX signals from the controller.
Static Color mode sets the product to one of 63 preset static colors.
To select a preset static color, do the following:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER> and C 1–C 63 shows on the display.
3. Use <UP> or <DOWN> to select the desired preset color:
4. Press <ENTER>.
Auto Program mode sets the product to 1 of 4 color change programs.
To enable the Auto Program mode, do the following:
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER> and P 1–P 4 shows on the display.
3. Use <UP> or <DOWN> to select the desired auto program:
· P 1 - 6-color snap
· P 2 - 6-color fade
· P 3 - 63-color snap
· P 4 - 63-color fade
4. Press <ENTER>.
Program Speed sets the speed of the auto programs.
To set the auto programs' speed, follow the instructions below:
1. Press <MENU> repeatedly until S-- shows on the display.
2. Use <UP> or <DOWN> to select the desired auto program speed
S 1–S100 (slow to fast).
3. Press <ENTER>.
SlimPAR™ HEX 6 IRC User Manual Rev. 3