Infrared (Ir) Remote Control; Irc-6 Operation - Chauvet SlimPAR HEX 6 IRC User Manual

Infrared (IR)
Remote Control

IRC-6 Operation

Page 17 of 24
Infrared functionality of the SlimPAR™ HEX 6 IRC allows the product to be controlled with an
infrared remote controller. The IRC-6 available from CHAUVET® can remotely set the product to
various modes, as well as adjust program speed and microphone sensitivity.
To turn on the infrared functionality, do the following:
1. Press <MENU> repeatedly until SET shows on the display.
2. Press <ENTER> and On or OFF shows on the display.
3. Press <UP> or <DOWN> to select On (turns on IR functionality) or
OFF (turns off IR functionality).
4. Press <ENTER>.
The IRC-6 infrared remote control works only when it is pointed directly at the product and there is
nothing in between the remote and the product. If the products are spaced far apart, the remote
might need to be pointed at each product.
The next section describes how to use the IRC-6.
Auto Program Mode
Auto Program mode enables the auto programs on the product.
To use Auto Program mode, do the following:
1. Press <AUTO> on the IRC-6.
2. Press <+> or <–> to choose an auto program.
To adjust the speed of the auto program, do the following:
1. Press <SPEED> on the IRC-6.
2. Press <+> or <–> to increase or decrease the speed of the auto program.
Sound-Active Mode
Sound-Active mode enables the sound-active programs.
To use Sound-Active mode, do the following:
1. Press <SOUND> on the IRC-6.
2. Press <+> or <–> to choose a sound-active program.
To adjust the sound sensitivity in Sound-Active mode, do the following:
1. Press <SENSITIVITY> on the IRC-6.
2. Press <+> or <–> to either increase or decrease sound sensitivity.
Manual Color Selection
Manual color control enables selection of the 9 colors preprogrammed into the IRC-6.
To choose a specific color with the IRC-6, do the following:
1. Press <MANUAL> on the IRC-6.
2. Press any number between <0> and <9> to choose a color.
Manual Color Control
Manual color control enables individual adjustment for each color in the product.
To manually control the RGBAW+UV colors, do the following:
1. Press <MANUAL> on the IRC-6.
2. Press <R>, <G>, <B>, <A>, <UV>, or <W> (red, green, blue, amber, ultraviolet, or white) to
choose your color.
3. Press <+> or <–> to increase or decrease the amount of the color.
SlimPAR™ HEX 6 IRC User Manual Rev. 3