ABLE OF ONTENTS 1. Before You Begin ......................3 What Is Included ..........................3 Unpacking Instructions ........................3 Claims ..............................3 Text Conventions ..........................3 Symbols ............................3 Disclaimer ............................3 Product at a Glance ........................4 Safety Notes ............................ 4 2.
Useful information. Disclaimer Chauvet believes that the information contained in this manual is accurate in all respects. However, Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss, damage or disruption caused by any errors or omissions in this document, whether such errors or omissions result from negligence, accident or any other cause.
Product at a Use on Dimmer Auto Programs Outdoor Use Auto-ranging Power Supply Glance Sound-Active Replaceable Fuse User-Serviceable Master/Slave Safety Notes Please read the following Safety Notes carefully before working with the product. The Notes include important safety information about installation, usage, and maintenance. ·...
2. I NTRODUCTION Product Overview Infrared Sensor Carry Handle Glare Shield D-Fi™ AUTO Weather Sync/Clear Button Resistant Cover Fuse Holder Display Power In Menu Buttons On/Off Switch Kickstand The Weather Resistant Cover must be CLOSED in order for the product to be IP rated. Freedom Par Quad-4 IP User Manual Rev.
3. S ETUP The Freedom Par Quad-4 IP has an internal auto-ranging power supply and it can work AC Power with an input voltage range of 100 to 240 VAC, 50/60 Hz. · Always connect the product to a protected circuit (circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
When rigging the product onto a truss, you should use a mounting clamp of appropriate weight capacity. The Freedom Par Quad-4 IP has an M12 threaded mounting hole, which is appropriate for this purpose. For the Chauvet line of mounting clamps, go to www.chauvetlighting.com/cables-clamps-main.html/.
4. O PERATION Control Panel To access the control panel functions, use the four buttons located underneath the display. Please refer to the Product Overview to see the button locations on the control panel. Operation Button Function <MENU> Selects an operation mode <UP>...
To DMX-link a number of Freedom Par Quad-4 IP using wireless D-Fi, see D-Fi 2.4 GHz (DMX Mode Manual Sync). Information about DMX is in the DMX Primer, which is available from the Chauvet website www.chauvetlighting.com/download/. To ensure full access to all channels in each DMX mode, the highest recommended Starting Address DMX address is 503.
Freedom Par Quad-4 IP is fully compatible with the D-Fi 2.4 GHz wireless transceiver (transmitter/receiver) from Chauvet (sold separately). For more detailed information about D-Fi 2.4 GHz functionality, refer to the D-Fi 2.4 GHz User Manual available at the Chauvet website www.chauvetlighting.com. Manual syncing is recommended for best results.
The Freedom Par Quad-4 IP offers wireless control of 2 or more products with a single D-Fi 2.4 GHz DMX controller. To automatically set up D-Fi 2.4 GHz syncing for DMX, do the following: (DMX Mode For the receiving product(s): Press <MENU>...
Channel Function Value Percent/Setting 6-CH Dimmer 000ó255 0–100% 000ó255 0–100% Green 000ó255 0–100% Blue 000ó255 0–100% Amber 000ó255 0–100% 000ó255 No function Strobe 000ó255 Strobe, slow to fast Channel Function Value Percent/Setting 4-CH 000ó255 0–100% Green 000ó255 0–100% Blue 000ó255 0–100% Amber 000ó255...
Configuration Set the product in one of the standalone modes to control without a DMX controller. · Connect the product to a suitable power outlet. (Standalone) Auto mode sets the product to 1 of 4 preset color programs. Auto Mode To set the product to Auto mode, do the following: Press <MENU>...
Remote and set the strobe. Control The Freedom Par Quad-4 IP is compatible with the included IRC-6 from Chauvet. To enable use with the IRC-6, follow the instructions below: Press <MENU> repeatedly until SET shows on the display. Press <ENTER> and ON (turns on the infrared sensor) or OFF (turns off the infrared sensor) shows on the display.
5. M AINTENANCE Product Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life and/or mechanical wear. To maintain optimum Maintenance performance and minimize wear, clean your lighting products at least twice a month. However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency.
6. T ECHNICAL PECIFICATIONS Dimensions and Length Width Height Weight Weight 5.4 in (138 mm) 5.7 in (145 mm) 7.5 in (191 mm) 8.0 lb (3.6 kg) Note: Dimensions in inches rounded to the nearest decimal digit. Power Power Supply Type Range Voltage Selection Switching (internal)
If you are located in Mexico, contact Chauvet Mexico. · If you are located in Benelux, contact Chauvet Europe BVBA. · If you are located in any other country, DO NOT contact Chauvet. Instead, contact your local distributor. See www.chauvetlighting.com for distributors outside the U.S., UK, Ireland, Mexico, or Benelux.
(954) 577-4455 Email: tech@chauvetlighting.com Fax: (954) 929-5560 World Wide Web Toll free: (800) 762-1084 www.chauvetlighting.com EUROPE General Information - Chauvet Europe BVBA Technical Support Address: Stokstraat 18 Email: Eutech@chauvetlighting.eu 9770 Kruishoutem Belgium World Wide Web Voice: +32 9 388 93 97 www.chauvetlighting.eu...