Configuration (Standalone); Preset Colors; Automatic Program; Program Speed - Chauvet 4BAR Tri USB User Manual

Hide thumbs Also See for 4BAR Tri USB:
Table of Contents

Advertisement

Configuration
(Standalone)

Preset Colors

Automatic
Program

Program Speed

Sound-Active
Mode

Sound Sensitivity

RGB Color Mixing

Page 12 of 20
Set the product in one of the standalone modes to control without a DMX controller.
·
Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
To run the 4BAR™ Tri USB in Preset Color mode, follow the instructions below:
1.
Press <MENU> repeatedly until C-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select C 1
4.
Press <ENTER>.
To run the 4BAR™ Tri USB in Automatic mode, do the following:
1.
Press <MENU> repeatedly until Auto shows on the display.
2.
Press <ENTER>.
To change the auto program speed, follow the instructions below:
1.
Press <MENU> repeatedly until S-- shows on the display.
2.
Press <ENTER> and Sxxx will show on the display:
3.
Use <UP> or <DOWN> to increase or decrease the speed.
4.
Press <ENTER>.
To run the 4BAR™ Tri USB in Sound-Active mode, do the following:
1.
Press <MENU> repeatedly until Snd shows on the display.
2.
Press <ENTER>.
To change the sound sensitivity, follow the instructions below:
1.
Press <MENU> repeatedly until Sens shows on the display.
2.
Press <ENTER> and uxxx will show on the display:
3.
Use <UP> or <DOWN> to increase or decrease the sensitivity.
4.
Press <ENTER>.
To custom mix a color, do the following:
1.
Press <MENU> repeatedly until U-- shows on the display.
2.
Press <ENTER> and one of the following will show on the display:
·
rxxx (red)
·
gxxx (green)
·
bxxx (blue)
3.
Press <ENTER> to cycle through the color settings.
4.
When the desired color shows on the display, use <UP> or <DOWN> to increase or
decrease the color value.
5.
Repeat steps 3 and 4 until the product outputs as desired.
C 7.
4BAR™ Tri USB User Manual Rev. 2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents