Mounting; Orientation; Rigging; Rigging Diagram - Chauvet SlimPAR HEX 6 IRC User Manual

Before mounting the product, read and follow the safety recommendations indicated in

Mounting

the Safety Notes above. For the CHAUVET® line of mounting clamps, go to
www.chauvetlighting.com/cables-clamps-main.html/.
The SlimPAR™ HEX 6 IRC is designed to hang from a pipe or truss with the front lens at any angle.

Orientation

Place the product so there is at least 20" of space around it. Be sure it is accessible for programming
and control panel operation.

Rigging

Rig the product from a structure or surface that can support the product's weight. See the
Technical Specifications in this manual for the product's weight.
When mounting the product overhead, always use a mounting clamp and safety cable. Mount the
product securely to a rigging point, such as a pipe or truss. The mounting bracket (yoke) has a
13-mm hole. The CH-05 safety cable and the CLP-15 mounting clamp (both available from Chauvet)
are appropriate for this product.
The bracket adjustment knobs allow for directional adjustment when aiming the product to the
desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the
knobs.
Mounting
Clamp
Double-Bracketed
Yoke
Safety Cable

Rigging Diagram

Bracket
Adjustment
Knobs (2x)
SlimPAR™ HEX 6 IRC User Manual Rev. 3 Page 10 of 24