Sound-Active
Mode
Custom Color
Mode
SlimPAR™ HEX 6 IRC User Manual Rev. 3
Sound-Active mode sets the product to respond to sounds and music.
To enable the Sound-Active mode, do the following:
1. Press <MENU> repeatedly until Snd shows on the display.
2. Press <ENTER> and Snd1 (6-color) or Snd2 (63-color) shows on the display.
3. Use <UP> or <DOWN> to select the desired sound-active program.
4. Press <ENTER>.
The product will respond only to low frequencies of music (bass and drums).
If the product is not responding to sound, increase the sensitivity. See
more information.
Custom Color mode sets a custom color by adjusting the individual colors in the product.
1. Press <MENU> repeatedly until U-- shows on the display.
2. Press <ENTER> and one of the following shows on the display (where XXX is a number
between 0 and 255:
· rXXX (red)
· gXXX (green)
· bXXX (blue)
· AXXX (amber)
· WXXX (white)
· PXXX (ultraviolet)
3. Press <ENTER> repeatedly to select a color.
4. Use <UP> or <DOWN> to find a value between 0–255.
NOTE: Selecting 0 will turn the color off.
5. Press <ENTER> to select the value.
6. Repeat steps 3 to 5 until the product displays the desired color.
Sound Sensitivity
for
Page 16 of 24