Print; Print Productivity; Bandwidth - Lexmark X792de Operation Instructions Manual

Print

PRINT PRODUCTIVITY

Evaluating print productivity is not as simple as timing copy
jobs. The printing process involves several steps and can
be affected by a variety of factors along the way.
The document must first be spooled by the print driver into
a PCL or PostScript file. The PCL or PostScript file is then
sent to the printer where it is raster image processed
(RIPped) into image data by the device processor. The
image data is then sent to the marking engine and output
as printed pages.
It is possible to time and compare these factors through the
use of careful preparation, conditioning and testing.
Following are charts that show printing performance when
tested under controlled conditions.
NETWORK PRINTING
 The Lexmark X792de Color Laser MFP's Rated Output
Speed is 50 ppm in both monochrome and color. The
X792de MFP's Rated First Page Out Time (FPOT) is as
fast as 8.0 seconds in monochrome and 8.5 seconds in
color.
 The Lexmark X792de Color Laser MFP provides users a
choice of multiple print drivers including PCL 5c Emulation,
PCL 6 Emulation, PostScript 3 Emulation, Personal Printer
Data Stream (PPDS), xHTML, PDF 1.6, Direct Image,
Microsoft XPS (XML Paper Specification).
 High print resolutions of up to 1200 x 1200 dpi resolution
for enhanced image quality.
 Drivers support the following Microsoft Windows
operating systems: Windows XP, XP x64, Server 2003,
Server 2003 running Terminal Services, Server 2003 x64,
Server 2003 x64 running Terminal Services, Vista, Vista
x64, Server 2008, Server 2008 x64, Server 2008 running
Terminal Services, Windows Server 2008 x64 running
Terminal Services, and Windows 7.
 Drivers support the following Novell operating systems:
Novell NetWare 6.5 Open Enterprise Server, Novell
NetWare 5.1(SP 6+), 6.0(SP 3+) with Novell Distributed
Print Services (NDPS), and Novell Open Enterprise Server
on SUSE Linux Enterprise Server.
 Drivers support the following Linux operating systems:
Debian GNU/Linux 5.0, SUSE Linux Enterprise Server 10,
11, SUSE Linux Enterprise Desktop 10, 11, openSUSE
11.2, 11.3, Red Hat Enterprise Linux WS 4.0, 5.0, Red
Flag Linux Desktop 6.0, Linpus Linux Desktop 9.6, Ubuntu
9.04, 9.10, 10.04, and Fedora 12, 13.
 Drivers support the following UNIX operating systems:
Copyright © 2011 BERTL Inc.
All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This
document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly
prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
Sun Solaris SPARC 8, 9, 10, Sun Solaris x86 10, HP-UX
11.11, 11.23, 11.31, and IBM AIX 5.2, 5.3, 6.1.
 Drivers support the following Citrix MetaFrame virtual
operating systems: Microsoft Windows Server 2003
running Terminal Services with Citrix Presentation Server
3.0, 4.0, 4.5, Microsoft Windows Server 2003 and 2003
X64 Edition with Citrix XenApp 5.0, and Microsoft Windows
Server 2008 and 2008 X64 Edition with Citrix XenApp 5.0.
 Users can connect to the Lexmark X792de Color Laser
MFP via Ethernet 10/100/1000 BaseTX (RJ-45), USB 2.0
Specification Hi-Speed Certified (Type B), Front USB 2.0
Specification Hi-Speed Certified Port (Type A), and Rear
USB 2.0 Specification Hi-Speed Certified Port (Type A).
The device also features the following optional local ports:
Internal RS-232C serial and Internal 1284-B Bi-directional
Parallel.
 The Lexmark X792de Color Laser MFP supports the
following network protocols: TCP/IP IPv4, AppleTalk™,
TCP/IP IPv6, TCP, and UDP. Network Printing Methods
supported include: LPR/LPD, Direct IP (Port 9100), HTTP,
NDPS/NEPS (Novell Distributed Print Services, Novell
Netware Enterprise Print Services), Enhanced IP (Port
9400). FTP, TFTP, IPP 1.1 (Internet Printing Protocol),and
ThinPrint print integration.
 This device supports several network security standards
such as the following: SNMPv3, 802.1x Authentication,
MD5, MSCHAPv2, LEAP, PEAP, TLS, TTLS, and IPSec.
Fast productivity with a powerful 1.2 GHz CPU and 1,024
MB of memory that is expandable to 2,048 MB.
TESTING RESULTS
Monochrome Print Productivity
# of Originals
Mode
50 Simplex
50 Duplex
Print productivity is evaluated based on a text based letter sized 50 page
PDF file.
Color Print Productivity
# of Originals
Mode
32 Simplex
32 Duplex
Color print productivity is evaluated based on a graphic based letter sized
32 page PPT file.
January 2011
Lexmark X792de MFP
www.BERTL.com
PCL PostScript
49.0 ppm 49.4 ppm
49.6 ppm 49.9 ppm
PCL PostScript
45.6 ppm 49.4 ppm
46.7 ppm 48.9 ppm
January 2011
Page 5