Lexmark X792de Operation Instructions Manual page 14

Ease of Use
An FTP destination could also be another PostScript
printer; for example, a color document can be scanned and
then sent to a color printer.
Sending a document to an FTP server is similar to sending
a fax. The difference is that you are sending the
information over your network instead of over the phone
line.
Above and below: When scanning a document, users can
adjust the scanning resolution by pressing on the left or
right arrows.
Copyright © 2011 BERTL Inc.
All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This
document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly
prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
When scanning a document, users can select the output
format (PDF, Secure PDF, TIFF, JPEG or XPS) for the
scanned image. Files can be scanned and saved onto the
network, FTP site or a USB memory stick.
The e-mail options button provides users with the
opportunity of editing the e-mail subject, naming their file
attachment and adding a message.
Users can also use the device to e-mail scanned
documents to one or more recipients. There are three ways
to send an e-mail from the device: you can type the e-mail
address, use a shortcut number, or use the address book.
January 2011
Lexmark X792de MFP
www.BERTL.com
January 2011
Page 14