Table of Contents
Advertisement
Print/Encode Error: Unit has detected an error during the print and/or encode process.
Usually no error message is displayed (except for jams), so normally the display will remain
"Online/Ready". However, if an error message is displayed it will be in the form of "Online/Print / Encode
Error.
Press the ONLINE key twice to manually clear the message; or message will be cleared upon receiving
any valid AEA command.
O n l i n e
R e a d y
Missing PECTAB: Ticket print message is referencing a PECTAB not currently in memory.
Press the ONLINE key twice to manually clear the message; or message will be cleared upon receiving
any valid AEA command.
O n l i n e
M i s s i n g P e c t a b # # #
#
Check-In or Revalidation in progress: Unit could not process the incoming command (like PECTAB
load) because it is currently performing a Check-In or Revalidation process.
Consult CRS (Host Provider) for dealing with this condition.
O n l i n e
E R R 7 : C p n I n s e r t e d
Error in PECTAB load: Unit detected a format error in the PECTAB load.
Press the ONLINE key twice to manually clear the message; or message will be cleared upon receiving
any valid AEA command.
O n l i n e
P T : # # # # E l e m e n t : c c
PECTAB exceeds memory: There is not enough memory available in the unit to load the incoming data
such as a PECTAB, Logo, or Template.
Press the ONLINE key twice to manually clear the message; or message will be cleared upon receiving
any valid AEA command.
O n l i n e
P T : # # # # N o M e m o r y
ADP 4100 Printer Installation and Operators Manual, April 2007
OR
P r i n t / E n c o d e E r r o r
Where #### = the PECTAB name being referenced
by the ticket data stream
Where #### = the name of the PECTAB and
cc = the PECTAB element where the error was
detected
Where #### = the name of the PECTAB
ADP 4100 Printer
O n l i n e
45
Advertisement
Table of Contents
