ADP 4100 Printer
Plugging in the Unit
12
The Unit has the following physical connections:
1. POWER: An IEC 320 power connection accepting 110/220VAC
(50/60Hz).
2. COMM 1 and COMM 2: RS-232 interface connections. These
connections are DB-25 female pin connectors and are configured
as DTE. A null modem cable quickly interfaces the Unit to a
standard connection on a typical PC-based host system.
Optional Connections
3. Ethernet: An optional RJ-45 connection is available for Ethernet-
based connections providing TCP/IP and Web Server
connectivity.
4. USB: An optional Universal Serial Bus connection is available for
USB connectivity.
5. Modem: An optional RJ-11/RJ-12 connection is available for
modem (phone line) based connections.
6. RF: An optional antenna mount is available for RF based
connectivity.
ADP 4100 Printer Installation and Operators Manual, April 2007