Galileo ADP 4100 Installation And Operator's Manual page 37

ADP 4100 Printer Installation and Operators Manual, April 2007
8. Tighten the thumbscrew clockwise and secure the new print head
assembly. Torque thumbscrew to 10in-lbs.
9. Re-install the power and interface cables into the print head
assembly.
10. Power the Unit on. Take the Unit off-line by pressing the ONLINE
key.
11. Press the ENTER key and then either the UP or DOWN arrow
until the SERVICE MENU appears. Press the ENTER key.
12. Enter the service password (UP/DOWN arrows change the
individual character value and RIGHT/LEFT arrows move the
cursor side to side). Press the ENTER key.
13. Press the UP or DOWN arrow key until the MAINTENANCE menu
appears. Press the ENTER key.
14. Press the UP or DOWN arrow key until the NEW PRINTHEAD
option appears. Press the ENTER key. The Unit will read the
baseline resistance of the print head you just installed.
Once the baseline resistance has been read, press the ONLINE
key to put the Unit back into service.
ADP 4100 Printer
35