Table of Contents
Advertisement
ADP 4100 Printer
Physical
Environmental
Installation
Unpacking
8
-
Dimensions: 11-5/8" wide, 23-1/2" high (without casters), 21-
3/4" deep
-
Weight: 50lbs (23 kg), Standard Configuration
-
Shipping Container Dimensions: (See "Installation" section)
-
Operating Temperature:40 to 104°F (4 to 40°C)
-
Storage Temperature:-4 to 140°F (-20 to 60°C)
-
Relative Operating Humidity:5 to 95%, non-condensing,
without degraded performance
-
Relative Storage Humidity: 5 to 95%, non-condensing,
without damage to components
Inspect the shipping container for evidence of in-transit damage, such
as being dropped, crushed, or punctured. If damage is evident,
contact the carrier directly to specify the nature and extent of damage.
If the container is free of damage, remove the Unit from the shipping
container by opening the side panel marked "OPEN THIS END". Pull
the Unit (secured with packing foam pieces) from the container and
remove the foam from the Unit.
The keys are in a package attached to the rear of the Unit.
Retain original shipping carton and foam for future use.
Accessories Kit
After the Unit has been removed from the shipping container, remove
the Accessories Kit from the Bin A/B location on the left side. The
Accessories Kit consists of the power cord, ticket catcher, Operator's
Manual or Product CD, and some sample stock for testing. The exact
contents of the kit are subject to change without notice.
ADP 4100 Printer Installation and Operators Manual, April 2007
Advertisement
Table of Contents
