Table of Contents
Advertisement
ADP 4100 Printer Installation and Operators Manual, April 2007
WARNING
To prevent personal injury, be prepared to release ticket stock
when the bin input senses that ticket stock has been inserted.
The paper drive motors will begin to run and the ticket stock will
quickly move a short distance as the stock is positioned for
loading into each bin input.
Be aware of this abrupt action and release the ticket stock when
the bin motor grabs onto the ticket stock and pulls it into the bin
input.
7. Insert ticket stock into selected bin inputs, staple stub first and
oriented as shown above. Note that the magnetic stripe (if
applicable) must be against the inner wall as shown. Release
ticket stock when the bin motor begins to pull the ticket stock into
operating position. Refer to diagram on the left side door (internal
panel) for more detail.
8. When all selected paths have been loaded with ticket stock, close
and lock the left side door.
9. If the Unit is in the Off-line state, press the ONLINE key to resume
operation.
ADP 4100 Printer
19
Advertisement
Table of Contents
