Http Settings - Brickcom FB-100A Series User Manual

HTTP Settings

Select this option to send the media files via an HTTP notification when an event is
triggered.
URL –Specify the URL to send HTTP
http://ip_address/ notification.cgi?parameter
ip_address – type the IP address or host name of the HTTP host.
Parameter – type the notification parameter if necessary.
Example
URL - http://192.168.1.1/xxxx.cgi
Message - name1=value1&name2=vlaue2
Result - http://192.168.1.1/xxxx.cgi? name1=value1&name2=vlaue2
Ex:
https://192.168.1.1/notification.cgi?event=MD&camera=FB-100A
Message - Enter the message notification that will be sent when an event is
triggered.
Enter the user name and password if necessary.
Click Apply to apply settings or Cancel to cancel changes.
requests. The URL is normally written as:
67