Cleaning The Toner Density Sensor - Xerox Phaser 6020 User Manual

Cleaning the Toner Density Sensor

Clean the color toner density (CTD) sensor when an alert for the CTD sensor appears on the control
panel or in the PrintingScout Printer Status window.
To clean the toner density sensor:
1. Turn off the printer.
2. Push down on the rear door release and pull open the door.
3. Use a dry cotton swab to clean the color toner density sensor.
4. Close the rear door.
Maintenance
® ®
Xerox Phaser 6020 Printer
User Guide
79