Xerox Phaser 6020 User Manual page 55

8. Push in the length guides and slide bar until they stop.
Note: Depending on the size of the paper, first push the slide bar toward the printer until it stops.
Pinch the length guide and slide it in until it touches the paper edge.
9. Place the dust cover on the main tray, then align the tabs with the marks.
10. If the paper that you loaded is not plain, set the correct paper type and size in your print driver. For
details, see Using Custom Paper Sizes
Note: If you are printing on custom size paper, define the custom size in the printer properties before
printing.
on page 68.
Paper and Media
® ®
Xerox Phaser 6020 Printer
User Guide
55