Table of Contents
Advertisement
6-4
Air Shroud
Air shrouds concentrate airfl ow to maximize fan effi ciency. The SC219 chassis air
shroud does not require screws for installation.
Installing the Air Shroud
1. Lay the chassis on a fl at, stable surface and remove the chassis cover.
2. Ensure that the motherboard, CPU, heatsink and memory are all properly
installed.
3. If necessary, move any cables that interfere with the air shroud placement.
4. Place the air shroud in the chassis. The air shroud fi ts just behind the fans in
the fan rack. Slide the air shroud into the grooves just behind the fan rack.
Note that some serverboards may require the air shroud to be modifi ed to
fi t over the serverboard. The SC219 chassis air shroud is designed with
break-away pieces that may be removed to accommodate differing styles of
serverboards.
Figure 6-5. Installing the Air Shroud
6-5
Chapter 6: Advanced Chassis Setup
Advertisement
Table of Contents
