Supero 2027R-WRF User Manual
  1. Manuals
  2. Brands
  3. Supero Manuals
  4. Server
  5. 2027R-WRF
  6. User manual

Supero 2027R-WRF User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
S
UPER
®
SUPERSERVER
2027R-WRF
USER'S MANUAL
Revision 1.0a

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2027R-WRF and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Supero 2027R-WRF

Summary of Contents for Supero 2027R-WRF

  • Page 1 UPER ® SUPERSERVER 2027R-WRF USER'S MANUAL Revision 1.0a...
  • Page 2 The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates.

  • Page 3: About This Manual

    About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SuperServer 2027R-WRF Installation and maintainance should be performed by experienced technicians only. The SuperServer 2027R-WRF is a high-end server based on the SC213A-R740WB 2U rackmount chassis and the X9DRW-iF dual processor serverboard.
  • Page 4 SUPERSERVER 2027R-WRF USER'S MANUAL Chapter 6: Advanced Chassis Setup Refer to Chapter 6 for detailed information on the SC213A-R740WB server chassis. You should follow the procedures given in this chapter when installing, removing or reconfi guring SATA or peripheral drives and when replacing system power supply units and cooling fans.
  • Page 5 Preface Notes...

  • Page 6: Table Of Contents

    SUPERSERVER 2027R-WRF USER'S MANUAL Table of Contents Chapter 1 Introduction Overview ......................1-1 Serverboard Features ..................1-2 Processors ...................... 1-2 Memory ......................1-2 Serial ATA ....................... 1-2 Onboard Controllers/Ports ................1-2 Graphics Controller ..................1-3 Other Features ....................1-3 Server Chassis Features ................1-3 System Power ....................
  • Page 7 Table of Contents Reliable Ground ..................2-3 Installing the System into a Rack ..............2-4 Identifying the Sections of the Rack Rails ............2-4 Locking Tabs ....................2-5 The Inner Rail Extensions ................2-6 Outer Rack Rails ..................... 2-7 Attaching the Outer Rack Rails to the Rack ........... 2-8 Checking the Serverboard Setup ..............
  • Page 8 SUPERSERVER 2027R-WRF USER'S MANUAL Connecting the Control Panel ................. 5-2 I/O Ports ......................5-3 Processor and Heatsink Installation..............5-4 Installing a Passive CPU Heatsink ..............5-8 Removing the Heatsink ................... 5-9 Installing Memory ..................5-10 Memory Support .................... 5-10 Adding PCI Expansion Cards ............... 5-13 Serverboard Details ..................
  • Page 9 Table of Contents Event Logs ....................7-22 IPMI ....................... 7-24 Boot ....................... 7-26 Security ......................7-27 Save & Exit ....................7-27 Appendix A BIOS Error Beep Codes Appendix B System Specifi cations...
  • Page 10 SUPERSERVER 2027R-WRF USER'S MANUAL Notes...

  • Page 11: Chapter 1 Introduction

    Overview Supermicro's SUPERSERVER 2027R-WRF is a dual processor, 2U rackmount server. The 2027R-WRF is a high-end server comprised of two main subsystems: the SC213A-R740WB 2U server chassis and the X9DRW-iF dual processor serverboard. Please refer to our web site for information on operating systems that have been certifi...

  • Page 12: Serverboard Features

    SUPERSERVER 2027R-WRF USER'S MANUAL Serverboard Features At the heart of the SuperServer 2027R-WRF lies the X9DRW-iF, a dual processor serverboard based on the Intel PCH C602/C606 chipset. Below are the main features of the X9DRW-iF. (See Figure 1-1 for a block diagram of the chipset).

  • Page 13: Graphics Controller

    The following is a general outline of the main features of the SC213A-R740WB chassis. System Power When confi gured as a SUPERSERVER 2027R-WRF, the SC213A-R740WB chassis includes a redundant 740 Watt power supply. Hard Drive Subsystem The SC213A-R740WB chassis was designed to support sixteen hot-swap SATA/ SAS hard drives.

  • Page 14: I/O Backplane

    SUPERSERVER 2027R-WRF USER'S MANUAL I/O Backplane The SC213A-R740WB is designed to be used in a 2U rackmount confi guration for connecting up to sixteen hard disk drives to the system. Ports on the I/O backplane include one COM port, a VGA port, six USB 2.0 ports and two gigabit Ethernet ports.
  • Page 15 Chapter 1: Introduction Figure 1-1. Intel PCH C602/C606 Chipset: System Block Diagram Note: This is a general block diagram. Please see Chapter 5 for details. Right Slot PCIE 3.0x16 PE2 PE1 CPU Rear Socket 01 PROCESSOR CPU Front Socket 00 PROCESSOR BIOS P0PE3...

  • Page 16: Contacting Supermicro

    SUPERSERVER 2027R-WRF USER'S MANUAL Contacting Supermicro Headquarters Address: Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Web Site: www.supermicro.com Europe Address: Super Micro Computer B.V.

  • Page 17: Chapter 2 Server Installation

    Decide on a suitable location for the rack unit that will hold the SuperServer 2027R-WRF. It should be situated in a clean, dust-free area that is well ventilated. Avoid areas where heat, electrical noise and electromagnetic fi elds are generated.

  • Page 18: Warnings And Cautions

    SUPERSERVER 2027R-WRF USER'S MANUAL installation only in a Restricted Access Location (dedicated equipment rooms, service closets and the like). • This product is not suitable for use with visual display work place devices acccording to §2 of the the German Ordinance for Work with Visual Display Units.

  • Page 19: Rack Mounting Considerations

    Chapter 2: Server Installation • Allow the hot plug SATA drives and power supply modules to cool before touching them. • Always keep the rack's front door and all panels and components on the servers closed when not servicing to maintain proper cooling. Rack Mounting Considerations Ambient Operating Temperature If installed in a closed or multi-unit rack assembly, the ambient operating...

  • Page 20: Installing The System Into A Rack

    SUPERSERVER 2027R-WRF USER'S MANUAL Installing the System into a Rack This section provides information on installing the SC213 chassis into a rack unit with the rails provided. There are a variety of rack units on the market, which may mean that the assembly procedure will differ slightly from the instructions provided.

  • Page 21: Locking Tabs

    Chapter 2: Server Installation Locking Tabs Both inner chassis rails have a locking tab. The tabs lock the chassis into place when installed and pushed fully into the rack. These tabs also lock the server in place when fully extended from the rack. This prevents the server from coming completely out of the rack when you pull it out for servicing.

  • Page 22: The Inner Rail Extensions

    SUPERSERVER 2027R-WRF USER'S MANUAL The Inner Rail Extensions The inner rails are pre-attached and do not interfere with normal use of the chassis if you decide not to use a server rack. When using a rack, attach the inner rail extension to the inner rail to stabilize the chassis within the rack.

  • Page 23: Outer Rack Rails

    Chapter 2: Server Installation Outer Rack Rails Outer rails attach to the server rack and hold the chassis in place. The SC213 comes equipped with quick-release outer rails which allow the chassis to be easily extended or removed from the rack. Identifying the Outer Rails (Figure 2-4) 1.

  • Page 24: Attaching The Outer Rack Rails To The Rack

    SUPERSERVER 2027R-WRF USER'S MANUAL Attaching the Outer Rack Rails to the Rack The outer rails attach to the rack and allow easy access to the chassis. Installing the Outer Rails to the Rack (Figures 2-5 and 2-6) 1. Press the button to retract the outer rail extensions.
  • Page 25 Chapter 2: Server Installation Figure 2-6: Securing the Chassis to the Rack Note: The fi gures above are for illustration purposes only. Always install servers to the bottom of the rack fi rst.

  • Page 26: Checking The Serverboard Setup

    SUPERSERVER 2027R-WRF USER'S MANUAL Checking the Serverboard Setup After you install the 2027R-WRF in the rack, you will need to open the unit to make sure the serverboard is properly installed and all the connections have been made. Removing the Chassis Cover (Figue 2-7) 1.

  • Page 27: Checking The Drive Bay Setup

    Each processor needs its own heatsink. See Chapter 5 for instructions on processor and heatsink installation. 2. Your 2027R-WRF server system may have come with system memory already installed. Make sure all DIMMs are fully seated in their slots. For details on adding system memory, refer to Chapter 5.
  • Page 28 SUPERSERVER 2027R-WRF USER'S MANUAL Notes 2-12...

  • Page 29: Chapter 3 System Interface

    Chapter 3: System Interface Chapter 3 System Interface Overview There are several LEDs on the control panel as well as other LEDs on the drive carriers to keep you constantly informed of the over-all status of the system, as well as the activity and health of specifi c components. Most SC213 models are two buttons on the control panel: a reset button and an on/off switch.

  • Page 30: Control Panel Leds

    SUPERSERVER 2027R-WRF USER'S MANUAL Control Panel Buttons There are three buttons located on the front of the chassis: a reset button, a power on/off button and a UID button. • Power: The main power switch is used to apply or remove power from the power supply to the server system.
  • Page 31 Chapter 3: System Interface • HDD: Indicates IDE channel activity. SAS/SATA drive and/or DVD-ROM drive activity when fl ashing. • NIC2: Indicates network activity on GLAN2 when fl ashing. • NIC1: Indicates network activity on GLAN1 when fl ashing. • Power Failure: When this LED is on, it indicates a power failure in the power supply.

  • Page 32: Information Led

    SUPERSERVER 2027R-WRF USER'S MANUAL Information LED See the following table for the status shown by this LED. Information LED Status Description Continously on and red An overheat ocondition has occured. (This may be caused by cable congestion.) Blinking red (1 Hz) Fan failure: check for an inoperative fan.

  • Page 33: About Standardized Warning Statements

    Chapter 4: Warning Statements for AC Systems Chapter 4 Standardized Warning Statements for AC Systems About Standardized Warning Statements The following statements are industry standard warnings, provided to warn the user of situations which have the potential for bodily injury. Should you have questions or experience difficulty, contact Supermicro's Technical Support department for assistance.
  • Page 34 SUPERSERVER 2027R-WRF USER'S MANUAL Warnung WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr. Sie befi nden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut.
  • Page 35 Warning Statements for AC Systems ‫ﺟﺴﺪﻳﺔ‬ ‫ﺍﺻﺎﺑﺔ‬ ‫ﺗﺘﺴﺒﺐ ﻓﻲ‬ ‫ﺣﺎﻟﺔ ﻳﻤﻜﻦ ﺃﻥ‬ ‫ﺍﻧﻚ ﻓﻲ‬ ‫ﺧﻄﺮ‬ ‫ﻳﻌﻨﻲ‬ ‫ﻫﺬﺍ ﺍﻟﺮﻣﺰ‬ !‫ﺗﺤﺬﻳﺮ‬ ‫ﺍﻟﺪﻭﺍﺋﺮ‬ ‫ﺑﺎﻟﻤﺨﺎﻁﺮ ﺍﻟﻨﺎﺟﻤﺔ ﻋﻦ‬ ‫ﻦ ﻋﻠﻰ ﻋﻠﻢ‬ ، ‫ﻛ‬ ‫ﻣﻌﺪﺍﺕ‬ ‫ﺗﻌﻤﻞ ﻋﻠﻰ ﺃﻱ‬ ‫ﻗﺒﻞ ﺃﻥ‬ ‫ﺍﻟﻜﻬﺮﺑﺎﺋﻴﺔ‬ ‫ﺣﻮﺍﺩﺙ‬ ‫ﺃﻱ‬ ‫ﻭﻗﻮﻉ‬ ‫ﻤﻨﻊ‬ ‫ﻟ‬ ‫ﺍﻟﻮﻗﺎﺋﻴﺔ‬...

  • Page 36: Installation Instructions

    SUPERSERVER 2027R-WRF USER'S MANUAL Installation Instructions Warning! Read the installation instructions before connecting the system to the power source. 警告 将此系统连接电源前,请先阅读安装说明。 警告 將系統與電源連接前，請先閱讀安裝說明。 Warnung Vor dem Anschließen des Systems an die Stromquelle die Installationsanweisungen lesen. ¡Advertencia! Lea las instrucciones de instalación antes de conectar el sistema a la red de alimentación.

  • Page 37: Circuit Breaker

    Chapter 4: Warning Statements for AC Systems Circuit Breaker Warning! This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 250 V, 20 A. 警告 此产品的短路(过载电流)保护由建筑物的供电系统提供,确保短路保护设备的额定电 流不大于250V,20A。 警告 此產品的短路(過載電流)保護由建築物的供電系統提供,確保短路保護設備的額定電 流不大於250V,20A。...

  • Page 38: Power Disconnection Warning

    SUPERSERVER 2027R-WRF USER'S MANUAL ‫ﻓﻲ‬ ‫ﺍﻟﺘﻲ ﺗﻢ ﺗﺜﺒﻴﺘﻬﺎ‬ ‫ﻣﻦ ﺍﻟﺪﻭﺍﺋﺮﺍﻟﻘﺼﻴﺮﺓ‬ ‫ﺍﻟﺤﻤﺎﻳﺔ‬ ‫ﻣﻌﺪﺍﺕ‬ ‫ﻳﻌﺘﻤﺪ ﻋﻠﻰ‬ ‫ﻫﺬﺍ ﺍﻟﻤﻨﺘﺞ‬ ‫ﺍﻟﻤﺒﻨﻰ‬ ‫ﺃﻛﺜﺮ ﻣﻦ‬ ‫ﻟﻴﺲ‬ ‫ﻮﻗﺎﺋﻲ‬ ‫ﺍﻟ‬ ‫ﺍﻟﺠﻬﺎﺯ‬ ‫ﺗﻘﻴﻴﻢ‬ ‫ﺃﻥ‬ ‫ﺗﺄﻛﺪ ﻣﻦ‬ 20A, 250V Waarschuwing Dit product is afhankelijk van de kortsluitbeveiliging (overspanning) van uw electrische installatie.
  • Page 39 Chapter 4: Warning Statements for AC Systems Warnung Das System muss von allen Quellen der Energie und vom Netzanschlusskabel getrennt sein, das von den Spg.Versorgungsteilmodulen entfernt wird, bevor es auf den Chassisinnenraum zurückgreift, um Systemsbestandteile anzubringen oder zu entfernen. ¡Advertencia! El sistema debe ser disconnected de todas las fuentes de energía y del cable eléctrico quitado de los módulos de fuente de alimentación antes de tener acceso el interior del chasis para instalar o para quitar componentes de sistema.

  • Page 40: Equipment Installation

    SUPERSERVER 2027R-WRF USER'S MANUAL Equipment Installation Warning! Only trained and qualifi ed personnel should be allowed to install, replace, or service this equipment. 警告 只有经过培训且具有资格的人员才能进行此设备的安装、更换和维修。 警告 只有經過受訓且具資格人員才可安裝、更換與維修此設備。 Warnung Das Installieren, Ersetzen oder Bedienen dieser Ausrüstung sollte nur geschultem, qualifi ziertem Personal gestattet werden.

  • Page 41: Restricted Area

    Chapter 4: Warning Statements for AC Systems Waarschuwing Deze apparatuur mag alleen worden geïnstalleerd, vervangen of hersteld door geschoold en gekwalifi ceerd personeel. Restricted Area Warning! This unit is intended for installation in restricted access areas. A restricted access area can be accessed only through the use of a special tool, lock and key, or other means of security.

  • Page 42: Battery Handling

    SUPERSERVER 2027R-WRF USER'S MANUAL ‫אזור עם גישה מוגבלת‬ !‫אזהרה‬ ‫יש להתקין את היחידה באזורים שיש בהם הגבלת גישה. הגישה ניתנת בעזרת‬ .('‫כלי אבטחה בלבד )מפתח, מנעול וכד‬ ‫ﻣﺤﻈﻮﺭﺓ‬ ‫ﻣﻨﺎﻁﻖ‬ ‫ﻟﺘﺮﻛﻴﺒﻬﺎ ﻓﻲ‬ ‫ﻫﺬﻩ ﺍﻟﻮﺣﺪﺓ‬ ‫ﺗﺨﺼﻴﺺ‬ ‫ﺗﻢ‬ ،‫ﺃﺩﺍﺓ ﺧﺎﺻﺔ‬ ‫ﻣﻦ ﺧﻼﻝ ﺍﺳﺘﺨﺪﺍﻡ‬...
  • Page 43 Chapter 4: Warning Statements for AC Systems Warnung Bei Einsetzen einer falschen Batterie besteht Explosionsgefahr. Ersetzen Sie die Batterie nur durch den gleichen oder vom Hersteller empfohlenen Batterietyp. Entsorgen Sie die benutzten Batterien nach den Anweisungen des Herstellers. Attention Danger d'explosion si la pile n'est pas remplacée correctement. Ne la remplacer que par une pile de type semblable ou équivalent, recommandée par le fabricant.

  • Page 44: Redundant Power Supplies

    SUPERSERVER 2027R-WRF USER'S MANUAL Redundant Power Supplies Warning! This unit might have more than one power supply connection. All connections must be removed to de-energize the unit. 警告 此部件连接的电源可能不止一个，必须将所有电源断开才能停止给该部件供电。 警告 此裝置連接的電源可能不只一個，必須切斷所有電源才能停止對該裝置的供電。 Warnung Dieses Gerät kann mehr als eine Stromzufuhr haben. Um sicherzustellen, dass der Einheit kein trom zugeführt wird, müssen alle Verbindungen entfernt werden.

  • Page 45: Backplane Voltage

    Chapter 4: Warning Statements for AC Systems ‫ﺍﻣﺪﺍﺩ ﺍﻟﻄﺎﻗﺔ‬ ‫ﺑﻮﺣﺪﺍﺕ‬ ‫ﻋﺪﺓ ﺍﺗﺼﺎﻻﺕ‬ ‫ﺠﻬﺎﺯ‬ ‫ﺍﻟ‬ ‫ﻳﻜﻮﻥ ﻟﻬﺬﺍ‬ ‫ﻗﺪ‬ ‫ﺍﻟﻜﻬﺮﺑﺎء‬ ‫ﻋﻦ‬ ‫ﻮﺣﺪﺓ‬ ‫ﺍﻟ‬ ‫ﻟﻌﺰﻝ‬ ‫ﻛﺎﻓﺔ ﺍﻻﺗﺼﺎﻻﺕ‬ ‫ﻳﺠﺐ ﺇﺯﺍﻟﺔ‬ Waarschuwing Deze eenheid kan meer dan één stroomtoevoeraansluiting bevatten. Alle aansluitingen dienen verwijderd te worden om het apparaat stroomloos te maken. Backplane Voltage Warning! Hazardous voltage or energy is present on the backplane when the system is...

  • Page 46: Comply With Local And National Electrical Codes

    SUPERSERVER 2027R-WRF USER'S MANUAL Attention Lorsque le système est en fonctionnement, des tensions électriques circulent sur le fond de panier. Prendre des précautions lors de la maintenance. ‫מתח בפנל האחורי‬ !‫הרה‬ ‫אז‬ ‫קיימת סכנת מתח בפנל האחורי בזמן תפעול המערכת. יש להיזהר במהלך‬...

  • Page 47: Product Disposal

    Chapter 4: Warning Statements for AC Systems ¡Advertencia! La instalacion del equipo debe cumplir con las normas de electricidad locales y nacionales.Attention L'équipement doit être installé conformément aux normes électriques nationales et locales. ‫תיאום חוקי החשמל הארצי‬ !‫אזהרה‬ ‫הציוד חייבת להיות תואמת לחוקי החשמל המקומיים והארציים‬ ‫התקנת‬...

  • Page 48: Hot Swap Fan Warning

    SUPERSERVER 2027R-WRF USER'S MANUAL Warnung Die Entsorgung dieses Produkts sollte gemäß allen Bestimmungen und Gesetzen des Landes erfolgen. ¡Advertencia! Al deshacerse por completo de este producto debe seguir todas las leyes y reglamentos nacionales. Attention La mise au rebut ou le recyclage de ce produit sont généralement soumis à des lois et/ou directives de respect de l'environnement.
  • Page 49 Chapter 4: Warning Statements for AC Systems 当您从机架移除风扇装置，风扇可能仍在转动。小心不要将手指、螺丝起子和其他 物品太靠近风扇 警告 當您從機架移除風扇裝置，風扇可能仍在轉動。小心不要將手指、螺絲起子和其他 物品太靠近風扇。 Warnung Die Lüfter drehen sich u. U. noch, wenn die Lüfterbaugruppe aus dem Chassis genommen wird. Halten Sie Finger, Schraubendreher und andere Gegenstände von den Öffnungen des Lüftergehäuses entfernt. ¡Advertencia! Los ventiladores podran dar vuelta cuando usted quite ell montaje del ventilador del chasis.

  • Page 50: Power Cable And Ac Adapter

    SUPERSERVER 2027R-WRF USER'S MANUAL Waarschuwing Het is mogelijk dat de ventilator nog draait tijdens het verwijderen van het ventilatorsamenstel uit het chassis. Houd uw vingers, schroevendraaiers en eventuele andere voorwerpen uit de buurt van de openingen in de ventilatorbehuizing. Power Cable and AC Adapter...
  • Page 51 Chapter 4: Warning Statements for AC Systems ¡Advertencia! Al instalar el producto, utilice los cables de conexión previstos o designados, los cables y adaptadores de CA. La utilización de otros cables y adaptadores podría ocasionar un mal funcionamiento o un incendio. Aparatos Eléctricos y la Ley de Seguridad del Material prohíbe el uso de UL o CSA cables certifi...
  • Page 52 SUPERSERVER 2027R-WRF USER'S MANUAL Waarschuwing Bij het installeren van het product, gebruik de meegeleverde of aangewezen kabels, stroomkabels en adapters. Het gebruik van andere kabels en adapters kan leiden tot een storing of een brand. Elektrisch apparaat en veiligheidsinformatiebladen wet verbiedt het gebruik van UL of CSA gecertifi...

  • Page 53: Chapter 5 Advanced Serverboard Setup

    Chapter 5: Advanced Serverboard Setup Chapter 5 Advanced Serverboard Setup This chapter covers the steps required to install processors and heatsinks to the X9DRW-iF serverboard, connect the data and power cables and install add-on cards. All serverboard jumpers and connections are described and a layout and quick reference chart are included in this chapter.

  • Page 54: Connecting Cables

    SUPERSERVER 2027R-WRF USER'S MANUAL Connecting Cables Now that the processors are installed, the next step is to connect the cables to the serverboard. These include the data (ribbon) cables for the peripherals and control panel and the power cables. Connecting Data Cables The cables used to transfer data from the peripheral devices have been carefully routed in preconfi...

  • Page 55: I/O Ports

    Chapter 5: Advanced Serverboard Setup Figure 5-1. Front Control Panel Header Pins (JF1) Ground x (key) x (key) Power LED HDD LED NIC1 NIC2 OH/Fan Fail LED Power Fail LED Ground Reset Ground Power I/O Ports The I/O ports are color coded in conformance with the PC 99 specifi cation. See Figure 5-2 below for the colors and locations of the various I/O ports.

  • Page 56: Processor And Heatsink Installation

    SUPERSERVER 2027R-WRF USER'S MANUAL Processor and Heatsink Installation Caution! When handling the processor package, avoid placing direct pressure on the label area. Always connect the power cord last, and always remove it before adding, removing or changing any hardware components. Make sure that you install the processor into the CPU socket before you install the CPU heatsink.
  • Page 57 Chapter 5: Advanced Serverboard Setup 2. Press the second load lever labeled 'Close 1st' to release the load plate that covers the CPU socket from its locking position. Press down on Load the Lever Pull lever away labeled 'Close 1st' from the socket 3.
  • Page 58 SUPERSERVER 2027R-WRF USER'S MANUAL 5. Use your thumb and index fi nger to hold the CPU on its edges. Align the CPU keys, which are semi-circle cutouts, against the socket keys. Socket Keys CPU Keys 6. Once they are aligned, carefully lower the CPU straight down into the socket.
  • Page 59 Chapter 5: Advanced Serverboard Setup 7. With the CPU inside the socket, inspect the four corners of the CPU to make sure that the CPU is properly installed. 8. Close the load plate with the CPU inside the socket. Lock the lever labeled 'Close 1st' fi...

  • Page 60: Installing A Passive Cpu Heatsink

    SUPERSERVER 2027R-WRF USER'S MANUAL Installing a Passive CPU Heatsink 1. Do not apply any thermal grease to the heatsink or the CPU die -- the required amount has already been applied. 2. Place the heatsink on top of the CPU so that the four mounting holes are aligned with those on the Motherboard's and the Heatsink Bracket underneath.

  • Page 61: Removing The Heatsink

    Chapter 5: Advanced Serverboard Setup Removing the Heatsink Caution: We do not recommend that the CPU or the heatsink be removed. However, if you do need to uninstall the heatsink, please follow the instructions below to uninstall the heatsink to prevent damage done to the CPU or the CPU socket. 1.

  • Page 62: Installing Memory

    SUPERSERVER 2027R-WRF USER'S MANUAL Installing the Heatsinks We recommend the use of active type heatsinks (except for 1U systems). Use any onboard fan header for the CPU’s heatsink fan. To install the heatsink, please follow the installation instructions that are included with your heatsink package.
  • Page 63 Chapter 5: Advanced Serverboard Setup Figure 5-3. Installing DIMM into Slot To Install: Insert Notch Notch module vertically and press down until it snaps into place. Front View Pay attention to the alignment notch at the bottom. Note: Notch should align with To Remove: Use the receptive key point on the slot.
  • Page 64 SUPERSERVER 2027R-WRF USER'S MANUAL UDIMM Support on the Intel E5-2600 Series Processor Platform DIMMs Populated UDIMM Type POR Speeds (in Ranks per DIMM per DDR Channel (Unb. DIMM) MHz) (Any Combination) ECC/Non-ECC DDR3 1066, 1333 SR, DR ECC/Non-ECC DDR3 1066, 1333...

  • Page 65: Adding Pci Expansion Cards

    Chapter 5: Advanced Serverboard Setup Adding PCI Expansion Cards PCI Expansion Slots One riser card is used to support PCI expansion cards in the system. The riser card can support one UIO card and three full-height, full-length PCI-Express x8 expansion cards. Installing a PCI Add-on Card 1.

  • Page 66: Serverboard Details

    SUPERSERVER 2027R-WRF USER'S MANUAL Serverboard Details Figure 5-4. X9DRW-iF Serverboard Layout (not drawn to scale) COM1 USB0/1 JUIDB CTRL LAN1 LAN2 USB2/3 JPW4 IPMI-LAN CPU2 COM2 X9DRW-3F/iF Rev.1.02 CTRL JPW3 JI2C1 JVRM_I2C1 JPG1 BIOS JVRM_I2C2 CPU1 JPW2 JBT1 JBAT1 SATA/...

  • Page 67: X9Drw-If Quick Reference

    Chapter 5: Advanced Serverboard Setup X9DRW-iF Quick Reference Jumper Description Default Setting JBT1 Clear CMOS See Chapter 3 JI2C1/JI2C2 SMB to PCI-E Slots Open (Normal) JPB1 BMC Enable Pins 1-2 (Enabled) JPG1 VGA Enable Pins 1-2 (Enabled) JPL1 LAN1/LAN2 Enable Pins 1-2 (Enabled) JWD1 Watch Dog...
  • Page 68 SUPERSERVER 2027R-WRF USER'S MANUAL Connector Description COM1/COM2 Backplane COM Port1/Front Accessible COM2 Header FAN1~4,FANA, FANB CPU/System Fan Headers I-SATA 0~5 Intel PCH SATA Connectors 0~5 JBAT1 Onboard Battery (See Chpt. 4 for Used Battery Disposal) Speaker/Power LED Connector (Pins 1~3: PWR LED, Pins 6~7:...

  • Page 69: Connector Defi Nitions

    Chapter 5: Advanced Serverboard Setup Caution! To prevent damage to the power supply or motherboard, please use a power supply that contains a 24-pin, two 8-pin and one 4-pin power connectors. Be sure to connect these power supply connectors to the 24-pin power connector (JPW1), the two 8-pin power connectors (JPW2, JPW3) and the one 4-pin power connector (JPW4) on the motherboard.
  • Page 70 SUPERSERVER 2027R-WRF USER'S MANUAL PW_ON Connector Power Button Pin Defi nitions The Power Button connection is (JF1) located on pins 1 and 2 of JF1. Pin# Defi nition Momentarily contacting both pins will PW_ON power on/off the system. This button Ground can also be confi...
  • Page 71 Chapter 5: Advanced Serverboard Setup NIC1 (LAN1) LED NIC1 LED Pin Defi nitions (JF1) The NIC (Network Interface Controller) Pin# Defi nition LED connections for GLAN port 1 are located on pins 11 and 12 of JF1, and NIC 2 Activity LED the LED connection for GLAN Port 2 NIC 2 Link LED are on Pins 9 and 10.
  • Page 72 SUPERSERVER 2027R-WRF USER'S MANUAL Universal Serial Bus (USB) FP USB (4/5) Pin Defi nitions Four Universal Serial Bus ports (USB USB 4, 8,10, 6, 7 USB 5, 9, 11 0/1, 2/3) are located on the I/O back Pin # Defi nition Pin # Defi...
  • Page 73 Chapter 5: Advanced Serverboard Setup Serial Ports Serial Port Pin Defi nitions (COM1/COM2) Two COM connections (COM1 & Pin # Defi nition Pin # Defi nition COM2) are located on the motherboard. COM1 is located on the Backplane I/O panel. COM2, located next to Front Accessible USB 4/5, is used to provide front access serial support.
  • Page 74 SUPERSERVER 2027R-WRF USER'S MANUAL Unit Identifi er Switch UID Switch A Unit Identifier (UID) Switch and Pin# Defi nition two LED Indicators are located on Ground the motherboard. The UID Switch is Ground located next to the VGA port. The...
  • Page 75 Chapter 5: Advanced Serverboard Setup Chassis Intrusion Chassis Intrusion Pin Defi nitions A Chassis Intrusion header is located (JL1) at JL1 on the motherboard. Attach an Pin# Defi nition appropriate cable from the chassis to Intrusion Input inform you of a chassis intrusion when Ground the chassis is opened.
  • Page 76 SUPERSERVER 2027R-WRF USER'S MANUAL IPMB IPMB Header Pin Defi nitions A System Management Bus header for (JIPMB1) IPMI 2.0 is located at JIPMB1. Connect Pin# Defi nition the appropriate cable here to use the Data IPMB I C connection on your system.
  • Page 77 Chapter 5: Advanced Serverboard Setup Port 80 Header Port 80 Header Pin Defi nitions A Port 80 header, located at JLPC1, Pin # Defi nition provides Port 80 support. Port 80 is +3.3V an "Ask and Respond" port between a client machine and a host server. LFRAME# Port 80 allows the HTML (Hyper LCLK...

  • Page 78: Jumper Settings

    SUPERSERVER 2027R-WRF USER'S MANUAL Jumper Settings Connector Pins Explanation of Jumpers To modify the operation of the Jumper motherboard, jumpers can be used to choose between optional settings. Jumpers create shorts between two Setting pins to change the function of the connector.
  • Page 79 Chapter 5: Advanced Serverboard Setup Watch Dog Enable/Disable Watch Dog Enable/Disable Jumper Settings (JWD) Watch Dog (JWD1) is a system moni- Jumper Setting Defi nition tor that can reboot the system when Pins 1-2 Reset a software application hangs. Close Pins 1-2 to reset the system if an ap- Pins 2-3 plication hangs.

  • Page 80: 5-10 Onboard Indicators

    SUPERSERVER 2027R-WRF USER'S MANUAL 5-10 Onboard Indicators GLAN LED GLAN LEDs Activity Link Speed There are two LAN ports (LAN1/2) on the motherboard. Each Ethernet LAN port has two LEDs. The Yellow LED on the right indicates connection and GLAN Activity Indicator (Right) LED Settings activity.

  • Page 81: 5-11 Sata Drive Connections

    Chapter 5: Advanced Serverboard Setup Rear UID LED UID LED Status The rear UID LED is located at LED3 Color/State Status on the rear of the motherboard. This Blue: On Unit Identifi ed LED is used in conjunction with the rear UID switch to provide easy Blue: On Unit Identifi...

  • Page 82: 5-12 Installing Drivers

    SUPERSERVER 2027R-WRF USER'S MANUAL 5-12 Installing Drivers The Supermicro ftp site contains drivers and utilities for your system at ftp://ftp. supermicro.com. Some of these must be installed, such as the chipset driver. After accessing the ftp site, go into the CDR_Images directory and locate the ISO fi...
  • Page 83 SuperDoctor III, as the SuperDoctor III settings override the BIOS settings. To set the BIOS temperature threshold settings again, you would fi rst need to uninstall SuperDoctor III. Figure 5-8. Supero Doctor III Interface Display Screen (Health Information) 5-31...

  • Page 84: Superdoctor Iii

    SUPERSERVER 2027R-WRF USER'S MANUAL Figure 5-9. Supero Doctor III Interface Display Screen (Remote Control) Note: The SuperDoctor III program and User’s Manual can be downloaded from the Supermicro web site at http://www.supermicro.com/products/accessories/software/ SuperDoctorIII.cfm. For Linux, we recommend that you use the SuperoDoctor II application instead.

  • Page 85: Chapter 6 Advanced Chassis Setup

    Chapter 6: Advanced Chassis Setup Chapter 6 Advanced Chassis Setup This chapter covers the steps required to install components and perform maintenance on the SC213A-R740WB chassis. For component installation, follow the steps in the order given to eliminate the most common problems encountered. If some steps are unnecessary, skip ahead to the next step.

  • Page 86: Control Panel

    SUPERSERVER 2027R-WRF USER'S MANUAL Figure 6-1. Chassis: Front and Rear Views Control Panel Hot-Swap Drive Bays (16) IPMI Port PCI Expansion Slots (w/ Riser Cards) Power Supply COM1 Port USB Ports Ethernet Ports VGA Port Control Panel The control panel (located on the front of the chassis) must be connected to the JF1 connector on the serverboard to provide you with system status indications.

  • Page 87: System Fan Failure

    Chapter 6: Advanced Chassis Setup Adding a System Fan 1. Turn off the power to the system and unplug the power cord. 2. Remove the chassis cover then remove the dummy fan from the fan tray. 3. Place the new fan into the vacant space in the housing while making sure the arrows on the top of the fan (indicating air direction) point in the same direction as the arrows on the other fans.
  • Page 88 SUPERSERVER 2027R-WRF USER'S MANUAL 5. Place the new fan into the vacant space in the housing while making sure the arrows on the top of the fan (indicating air direction) point in the same direction as the arrows on the other fans (Figure 6-3).

  • Page 89: Installing The Air Shroud

    Chapter 6: Advanced Chassis Setup Installing the Air Shroud Air shrouds concentrate airfl ow to maximize fan effi ciency. The SC213 chassis air shroud does not require screws for installation. Installing the Air Shroud in the Chassis (Figure 6-4) 1. Lay the chassis on a fl at, stable surface and remove the chassis cover. 2.

  • Page 90: Checking Air Flow

    Proceed to the "DVD-ROM Drive Installation" section later in this chapter for instructions. Note: Only a "slim" DVD-ROM drive will fi t into the 2027R-WRF. Hard Drive Installation The hard drives are mounted in drive carriers to simplify their installation and removal from the chassis.
  • Page 91 Chapter 6: Advanced Chassis Setup Figure 6-5: Removing Hard Drive Tray...
  • Page 92 SUPERSERVER 2027R-WRF USER'S MANUAL Installing a Hard Drive into a Drive Carrier 1. Insert a drive into the carrier with the PCB side facing down and the connector end toward the rear of the carrier. 2. Align the drive in the carrier so that the screw holes of both line up. Note that there are holes in the carrier marked “SATA”...
  • Page 93 Chapter 6: Advanced Chassis Setup Caution: Use caution when working around the hard drive backplane. Do not touch the backplane with any metal objects and make sure no ribbon cables touch the backplane or obstruct the holes, which aid in proper airfl ow. Caution: Regardless of how many hard drives are installed, all drive carriers must remain in the drive bays to maintain proper airfl...

  • Page 94: Installing The Add-On Cards

    SUPERSERVER 2027R-WRF USER'S MANUAL Installing the Add-on Cards Add-on card installation in the SC213 chassis requires the installation of a riser card. Installing the Riser Card (Figure 6-8) 1. Remove the chassis cover. 2. Remove the riser bracket. 3. Install the riser card onto the riser bracket. Note that there are different cards for the right and left side of the bracket.
  • Page 95 Chapter 6: Advanced Chassis Setup Installing the Add-on Cards in a Riser Card (Figure 6-9) 1. Ensure that the riser card and riser card bracket have been correctly installed in the chassis. 2. Remove the blank bracket from the rear slot in the chassis. 3.

  • Page 96: Power Supply

    SUPERSERVER 2027R-WRF USER'S MANUAL Power Supply The SC213 chassis has two redundant 740 Watt power supplies. The power modules are hot-swappable, enabling the power supplies to be changed without powering down the system. These power supplies are auto-switching capable, which enables the power supply to automatically sense and operate at a 100v to 240v input voltage.

  • Page 97: Power Supply Failure

    Chapter 6: Advanced Chassis Setup Power Supply Failure If the power supply module fails, the Universal Information LED on the control panel will blink slowly and remain so until the failed module has been replaced. Replacement modules can be ordered directly from Supermicro (see contact information in the Preface).

  • Page 98: Installing The Power Distributor

    SUPERSERVER 2027R-WRF USER'S MANUAL Installing the Power Distributor The power distributor provides failover and power supply redundancy and is pre-installed in the chassis. In the rare event that you have to replace the power distributor, follow the steps below. Changing the Power Distributor (Figure 6-11) 1.

  • Page 99: Chapter 7 Bios

    Introduction This chapter describes the AMI BIOS Setup Utility for the SUPERSERVER 2027R-WRF. The 16 Mb AMI BIOS® is stored in a Flash EEPROM and can be easily updated. This chapter describes the basic navigation of the AMI BIOS Setup Utility setup screens.

  • Page 100: System Time/System Date

    SUPERSERVER 2027R-WRF USER'S MANUAL System Time/System Date You can edit this fi eld to change the system time and date. Highlight System Time or System Date using the <Arrow> keys. Enter new values through the keyboard. Press the <Tab> key or the <Arrow> keys to move between fi elds. The date must be entered in DAY/MM/DD/YYYY format.
  • Page 101 Chapter 7: BIOS Interrupt 19 Capture Interrupt 19 is the software interrupt that handles the boot disk function. When this item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt 19 at bootup and allow the drives that are attached to these host adaptors to function as bootable disks.
  • Page 102 SUPERSERVER 2027R-WRF USER'S MANUAL  Socket 1 CPU Information/Socket 2 CPU Information This submenu displays the following information regarding the CPUs installed in Socket 1/ Socket 2. • Type of CPU • CPU Signature • Microcode Patch • CPU Stepping •...
  • Page 103 Chapter 7: BIOS Limit CPUID Maximum This feature allows the user to set the maximum CPU ID value. Enable this function to boot the legacy operating systems that cannot support processors with extended CPUID functions. The options are Disabled (for the Windows OS), and Enabled. Execute Disable Bit Capability (Available if supported by the OS &...
  • Page 104 SUPERSERVER 2027R-WRF USER'S MANUAL Note: If there is any change to this setting, you will need to power off and restart the system for the change to take effect. Please refer to Intel’s website for detailed information.) CPU Power Management Confi guration This submenu allows the user to confi...
  • Page 105 Chapter 7: BIOS CPU C7 Report (Available when Power Technology is set to Custom) Select Enabled to allow the BIOS to report the CPU C7 State (ACPI C3) to the operating system. CPU C7 State is a processor-specifi c low C-State. The options are Enabled and Disabled.

  • Page 106: North Bridge

    SUPERSERVER 2027R-WRF USER'S MANUAL Chipset Confi guration North Bridge This feature allows the user to confi gure the settings for the Intel North Bridge. Integrated IO Confi guration Intel VT-d Select Enabled to enable Intel Virtualization Technology support for Direct I/O VT-d by reporting the I/O device assignments to the VWM (Virtual Working Memory) through the DMAR ACPI Tables.
  • Page 107 Chapter 7: BIOS QPI Confi guration Current QPI Link This item displays the current status of the QPI Link. Current QPI Frequency This item displays the frequency of the QPI Link. Isoc Select Enabled to enable Isochronous support to meet QoS (Quality of Service) requirements.

  • Page 108: Dimm Information

    SUPERSERVER 2027R-WRF USER'S MANUAL DIMM Information The status of the memory modules specifi ed below will be displayed as detected by the BIOS. CPU Socket 1 DIMM Information P1-DIMMA1/P1-DIMMB1/P1-DIMMC1/P1-DIMMD1/P1-DIMMA2/P1-DIMMB2/ P1-DIMMC2/P1-DIMMD2 CPU Socket 2 DIMM Information P2-DIMME1/P2-DIMMF1/P2-DIMMG1/P2-DIMMH1/P2-DIMME2/P2-DIMMF2/ P2-DIMMG2/P2-DIMMH2 Memory Mode When Independent is selected, all DIMMs are available to the operating system.
  • Page 109 Chapter 7: BIOS Patrol Scrub Patrol Scrubbing is a process that allows the CPU to correct correctable memory errors detected on a memory module and send the correction to the requestor (the original source). When this item is set to Enabled, the IO hub will read and write back one cache line every 16K cycles, if there is no delay caused by internal processing.
  • Page 110 SUPERSERVER 2027R-WRF USER'S MANUAL South Bridge Confi guration This feature allows the user to confi gure the settings for the Intel PCH chip. PCH Information This feature displays the following PCH information. Name: This item displays the name of the PCH chip.
  • Page 111 Chapter 7: BIOS SATA Confi guration When this submenu is selected, the AMI BIOS automatically detects the presence of IDE or SATA devices and displays the following items. SATA Port0~SATA Port5: The AMI BIOS displays the status of each SATA port as detected by the BIOS. SATA Mode Use this feature to confi...
  • Page 112 SUPERSERVER 2027R-WRF USER'S MANUAL Port 0~5 Hot Plug Select Enabled to enable hot-plug support for the particular port. The options are Enabled and Disabled. SCU (Storage Control Unit) Confi guration Storage Controller Unit Select Enabled to enable PCH SCU storage devices. The options are Disabled and Enabled.
  • Page 113 Chapter 7: BIOS Maximum Payload Select Auto to allow the system BIOS to automatically set the maximum payload value for a PCI-E device to enhance system performance. The options are Auto, 128 Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes. Maximum Read Request Select Auto to allow the system BIOS to automatically set the maximum Read Request size for a PCI-E device to enhance system performance.
  • Page 114 SUPERSERVER 2027R-WRF USER'S MANUAL Super IO Confi guration Super IO Chip: This item displays the Super IO chip used in the motherboard. Serial Port 1 Confi guration Serial Port Select Enabled to enable a serial port specifi ed by the user. The options are Enabled and Disabled.

  • Page 115: Serial Port Console Redirection

    Chapter 7: BIOS Serial Port Console Redirection • COM 1 and SOL/COM 2 These two submenus allow the user to confi gure the following Console Redirection settings for a COM Port selected by the user. Console Redirection Select Enabled to use a COM Port selected by the user for Console Redirection. The options are Enabled and Disabled.
  • Page 116 SUPERSERVER 2027R-WRF USER'S MANUAL Stop Bits A stop bit indicates the end of a serial data packet. Select 1 Stop Bit for standard serial data communication. Select 2 Stop Bits if slower devices are used. The options are 1 and 2.
  • Page 117 Chapter 7: BIOS ACPI Setting Use this feature to confi gure Advanced Confi guration and Power Interface (ACPI) power management settings for your system. ACPI Sleep State Use this feature to select the ACPI State when the system is in sleep mode. Select S1 (CPU_Stop_Clock) to erase all CPU caches and stop executing instructions.

  • Page 118: Tpm Enable Status

    SUPERSERVER 2027R-WRF USER'S MANUAL TPM Enable Status This item displays the status of TPM Support to indicate if TPM is currently enabled or disabled. TPM Active Status This item displays the status of TPM Support to indicate if TPM is currently active or deactivated.

  • Page 119: Discard Changes And Exit

    Chapter 7: BIOS Intel ME Subsystem Confi guration This feature displays the following ME Subsystem Confi guration settings. • ME BIOS Interface Version • ME Version iSCSI Confi guration: This item displays iSCSI confi guration information: iSCSI Initiation Name: This item displays the name of the iSCSI Initiator, which is a unique name used in the world.

  • Page 120: Event Logs

    SUPERSERVER 2027R-WRF USER'S MANUAL NIC Confi guration Link Speed This item allows the user to set the link speed for your network connections. The Options are AutoNeg (Auto Negotiation), 10 Mbps Half, 10 Mbps Full, 100 Mbps Half, and 10 Mbps Full.
  • Page 121 Chapter 7: BIOS Runtime Error Logging Support Select Enabled to support Runtime Error Logging. The options are Enabled and Disabled. Memory Correctable Error Threshold This feature allows the user to enter the threshold value for correctable memory errors. The default setting is 10. PCI Error Logging Support Select Enabled to support error event logging for PCI slots.

  • Page 122: Ipmi

    SUPERSERVER 2027R-WRF USER'S MANUAL View System Event Log This item allows the user to view the event in the system event log. Select this item and press <Enter> to view the status of an event in the log as shown below:...
  • Page 123 Chapter 7: BIOS Customize EFI Logging Options Log EFI Status Codes Select Enabled to log EFI (Extensible Firmware Interface) Status Codes, Error Codes or Progress Codes. The options are Enabled and Disabled. Note: After making changes on a setting, be sure to reboot the system for the changes to take effect.

  • Page 124: Boot

    SUPERSERVER 2027R-WRF USER'S MANUAL Boot This submenu allows the user to confi gure the following boot settings for the system. CSM Support Select Enabled to support the EFI Compatibility Support Module (CSM), which provides compatibility support for traditional legacy BIOS for system boot. The options are Enabled, Disabled and Auto.

  • Page 125: Security

    Chapter 7: BIOS Security This menu allows the user to confi gure the following security settings for the system. Administrator Password Use this feature to set the Administrator Password which is required to enter the BIOS setup utility. The length of the password should be from 3 characters to 20 characters long.
  • Page 126 SUPERSERVER 2027R-WRF USER'S MANUAL Discard Changes Select this feature and press <Enter> to discard all the changes and return to the BIOS setup. When the dialog box appears, asking you if you want to load previous values, click Yes to load the values previous saved, or click No to keep the changes you've made so far.

  • Page 127: Appendix A Bios Error Beep Codes

    Appendix A: BIOS Error Beep Codes Appendix A BIOS Error Beep Codes During the POST (Power-On Self-Test) routines, which are performed each time the system is powered on, errors may occur. Non-fatal errors are those which, in most cases, allow the system to continue the boot-up process.
  • Page 128 SUPERSERVER 2027R-WRF USER'S MANUAL Notes...

  • Page 129: Appendix B System Specifi Cations

    Intel PCH C602 on-chip controller for six-port Serial ATA (RAID 0, 1, 5 and 10 for Windows or RAID 0, 1 and 10 for LINUX supported) Drive Bays The 2027R-WRF contains sixteen (16) hot-swap drive bays to house up to sixteen SATA drives Peripheral Drive Bays 1x 5.25"...
  • Page 130 SUPERSERVER 2027R-WRF USER'S MANUAL Serverboard X9DRW-iF (Proprietary form factor) Dimensions: (LxW) 13.05 x 12.19 in. (331.47 x 312.17 mm) Chassis SC213A-R740WB (2U rackmount form factor) Dimensions: (WxHxD) 17.2 x 3.5 x 24.8 in. (437 x 89 x 630 mm) Weight Gross (Bare Bone): 35.5 lbs.
  • Page 131 Appendix B: System Specifi cations Regulatory Compliance Electromagnetic Emissions: FCC Class A, EN 55022 Class A, EN 61000-3-2/-3- 3, CISPR 22 Class A Electromagnetic Immunity: EN 55024/CISPR 24, (EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11) Safety: CSA/EN/IEC/UL 60950-1 Compliant, UL or CSA Listed (USA and Canada), CE Marking (Europe) California Best Management Practices Regulations for Perchlorate Materials:...
  • Page 132 SUPERSERVER 2027R-WRF USER'S MANUAL (continued from front) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be reasonably expected to result in signifi...

Table of Contents