Table of Contents
Advertisement
2-1
Overview
This chapter provides a quick setup checklist to get your 2026T-6RFT+/6RF+ up
and running. Following these steps in the order given should enable you to have
the system operational within a minimum amount of time. This quick setup assumes
that your system has come to you with the processors and memory pre-installed. If
your system is not already fully integrated with a serverboard, processors, system
memory etc., please turn to the chapter or section noted in each step for details on
installing specifi c components.
2-2
Unpacking the System
You should inspect the box the 2026T-6RFT+/6RF+ was shipped in and note if it
was damaged in any way. If the server itself shows damage you should fi le a dam-
age claim with the carrier who delivered it.
Decide on a suitable location for the rack unit that will hold the 2026T-6RFT+/6RF+.
It should be situated in a clean, dust-free area that is well ventilated. Avoid areas
where heat, electrical noise and electromagnetic fi elds are generated. You will also
need it placed near a grounded power outlet. Be sure to read the Rack and Server
Precautions in the next section.
2-3
Preparing for Setup
The box the 2026T-6RFT+/6RF+ was shipped in should include two sets of rail as-
semblies, two rail mounting brackets and the mounting screws you will need to install
the system into the rack. Follow the steps in the order given to complete the instal-
lation process in a minimum amount of time. Please read this section in its entirety
before you begin the installation procedure outlined in the sections that follow.
Choosing a Setup Location
•
Leave enough clearance in front of the rack to enable you to open the front door
completely (~25 inches) and approximately 30 inches of clearance in the back
of the rack to allow for suffi cient airfl ow and ease in servicing.This product is for
installation only in a Restricted Access Location (dedicated equipment rooms,
service closets and the like).
Chapter 2
Server Installation
2-1
Chapter 2: Server Installation
Advertisement
Table of Contents
