Table of Contents
Advertisement
Note: You must have RAID set up to enable the hot-swap capability of the SATA
drives. Documentation on RAID setup guidelines can be found on our web site.
Rear I/O Ports
The color-coded I/O ports include one COM port, a VGA (monitor) port, two USB
2.0 ports, PS/2 mouse and keyboard ports, one dedicated IPMI LAN port and two
gigabit Ethernet ports. The 2026T-6RFT+ (X8DTU-6TF+) includes two additional
10G Ethernet ports.
Graphics Controller
The X8DTU-6TF+/X8DTU-6F+ features an integrated Matrox G200eW graphics
chip.
Other Features
Other onboard features that promote system health include onboard voltage moni-
tors, auto-switching voltage regulators, chassis and CPU overheat sensors, virus
protection and BIOS rescue.
1-3
Server Chassis Features
The 2026T-6RFT+/2026T-6F+ is built upon the SC219A-R920 chassis. Details on
the chassis and on servicing procedures can be found in Chapter 6.The following
is a general outline of the main features of the chassis.
System Power
The SC219A-R920 features a redundant 920W power supply consisting of two
power modules. The system does not need to be shut down when replacing or
removing a single power supply module.
Hard Drives
The SC219A-R920 chassis was designed to support 16 hot-swappable 2.5" SAS
or SATA hard drives.
Chapter 1: Introduction
1-3
Advertisement
Table of Contents
