Installing The System Into A Rack; Identifying The Sections Of The Rack Rails; Locking Tabs - Supero SUPERSERVER 2026T-6RFT+ User Manual

S S
UPER ERVER 2026T-6RFT+/6RF+ User's Manual
2-5

Installing the System into a Rack

This section provides information on installing the 2026T-6RFT+/6RF+ into a rack
unit with the rack rails provided. There are a variety of rack units on the market,
which may mean the assembly procedure will differ slightly. You should also refer
to the installation instructions that came with the rack unit you are using.

Identifying the Sections of the Rack Rails

You should have received two rack rail assemblies in the rack mounting kit. Each
assembly consists of two sections: an inner fi xed chassis rail that secures directly
to the chassis and an outer rack rail that secures directly to the rack itself.

Locking Tabs

Both inner chassis rails have a locking tab. The tabs lock the chassis into place
when installed and pushed fully into the rack. These tabs also lock the server in
place when fully extended from the rack. This prevents the server from coming
completely out of the rack when you pull it out for servicing.
Figure 2-1. Identifying the Sections of the Inner Rack Rails
Inner Rails
(Pre-installed
on the chassis)
Inner Rail Extensions
2-4
Rail Locking
Tabs