Rm-Br300 Remote Control Unit (Not Supplied); Zoom Buttons - Sony BRC-Z330 Operating Instructions Manual

G BACK LIGHT button
Press this button to enable the backlight
compensation. Press it again to disable the
backlight compensation.
H POSITION buttons
Hold down the PRESET button and press button 1
to 6 to store the current camera direction, zooming,
focus adjustment and backlight compensation in
the memory of the pressed number button.
To erase the memory contents, hold down the
RESET button and press button 1 to 6.
I PAN-TILT RESET button
Press this button to reset the pan/tilt position.
J ZOOM buttons
Use the SLOW button to zoom slowly, and the
FAST button to zoom quickly.
Press the T (telephoto) side of the button to zoom
in, and the W (wide angle) side to zoom out.
Installing batteries
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
When you dispose of the battery, you must obey the law
in the relative area or country.
Note
To avoid risk of explosion, use R6 (size AA) manganese
or alkaline batteries.
22
Location and Function of Parts
Two R6 (size AA)
batteries (not supplied)
RM-BR300 Remote Control Unit
(not supplied)
This manual explains the operations of the RM-BR300
Remote Control Unit when it is used with BRC-Z330
cameras.
For operations with other cameras, refer to the
Operating Instructions supplied with the RM-BR300.
Front
8 90qaqsqd
1
VALUE LOCK
PANEL BLACK PAN-TILT
LIGHT LIGHT RESET
2
RESET
– +
R
POSITION
PRESET
MODE
BRIGHT
1 2 3 4
3
SHIFT
9 10 11 12
STD REV
– +
L/R
DIRECTION
B
4 CAMERA
AUTO
FOCUS
AUTO 1 2 3 4
POWER
MANUAL
5
ONE PUSH
AF
NEAR FAR
6
7 qhqjqk ql
A LOCK button and indicator
Press the LOCK button for more than one second,
and the LOCK indicator lights and the values set by
the VALUE/R, BRIGHT/B and FOCUS controls
are locked. (The indicators of the locked controls
are turned off.) The AUTO/MANUAL button is
also disabled.
Press the LOCK button for more than one second
again to unlock the controls and buttons.
B VALUE/R control
When the brightness adjustment mode is
selected with the MODE button (with the
VALUE indicator lit):
Adjusts the value of the item (SHUTTER, IRIS or
GAIN) selected with the menu of the camera.
When the VALUE indicator is lit, the function of
the control varies according to the MODE setting in
the EXPOSURE menu of the camera. For details,
see "Functions of the VALUE and BRIGHT
controls" on page 52.
When the white balance adjustment mode is
selected with the MODE button (with the R
indicator lit):
The function of the control with the R indicator lit
varies according to the white balance mode selected
on the camera. For details, see "Functions of the R
and B controls" on page 51.
qf qg
ONE PUSH
MENU
AWB
5 6 7 8
13 14 15 16
5 6 7
w;