Table of Contents
Advertisement
Using Accessories
Using an external audio system
Connect an audio mixer or other external audio system
component to the AUDIO IN CH-1/CH-2 connector as
shown below.
Using the RM-LG1 Remote Control Unit
You can control the DSR-300A/300AP using the
supplied RM-LG1 Remote Control Unit.
Location and Function of Parts
1 Cable with mini-plug
1
2 Switches 1 and 2
2
3 Switch name
displays
42
Chapter 2 Fitting and Connections
AUDIO IN (CH-1/CH-2) switches: Set to REAR.
CH-1
VJ MIC
WIRELESS
Input selection switch: Set to LINE.
LINE
AUDIO IN
CH-1/CH-2
1 Cable with mini-plug
Connect to the REMOTE connector 1 (6 on page 23)
on the DSR-300A/300AP.
2 Switches 1 and 2
You can assign functions to these switches using
advanced menu page 3 (see page 90) of the DSR-
4 Velcro
300A/300AP.
Each can be used as the following types of switch:
VTR switch, MARK switch, CUE switch, or NG
switch.
5 Cable clamp
When the DSR-300A/300AP is shipped, switch 1 is set
groove
as the VTR switch and switch 2 is set as the MARK
switch.
For information about the advanced menu and the function
of each switch, see "Location and Function of Parts" on
page 12 and "Viewfinder Advanced Menu" on page 88.
CH-2
AUDIO IN
FRONT
REAR
+48V ON
MIC
To audio mixer, etc.
Advertisement
Table of Contents
