Connecting A Monitor, Etc. Equipped With The; Connector; Analog Component (Ypbpr) Input Connector - Sony BRC-Z330 Operating Instructions Manual

To connect the Remote Control Unit
using the VISCA RS-422 connectors
You can use the VISCA RS-422 connectors to connect
the RM-BR300 Remote Control Unit to the camera
instead of the VISCA RS-232C connectors. Use of the
VISCA RS-422 connectors allows the connection up to
1,200 m (3,937 feet) away.
Prepare the connecting cable using the RS-422
connector plugs that come with the camera and the
Remote Control Unit.
For making the cable, refer to the pin assignments of the
VISCA RS-422 connector (pages 85 and 86) and the
wiring diagram of VISCA RS-422 connection
(page 88).
For the use of the RS-422 connector plugs, see page 89.
1 2 3 4 5 6 7 8 9
VISCA RS-422
!
DC IN 12V
IN VISCA RS-232C OUT
DC IN 12V
RM-BR300 Remote
Control Unit
Notes
• When using the VISCA RS-422 connectors, check
that the BOTTOM switch on the bottom of the camera
(page 20) and the DIP switch on the bottom of the
Remote Control Unit (page 25) are set to RS-422.
• When the connections using the VISCA RS-422
connectors are made, the VISCA RS-232C connection
is not available.
IR SELECT
1
OFF ON
2
DATA MIX
3
OFF ON
EXT SYNC IN
75
S VIDEO VIDEO
RGB/COMPONENT
VISCA RS-422
VISCA RS-422 cable
VISCA RS-422
DC IN 12V
Connecting a Monitor, etc.
Equipped with the Analog
Component (YPbPr) Input

Connector

1 2 3 4 5 6 7 8 9 IR SELECT
1
2
3
VISCA RS-422
!
DC IN 12V
IN VISCA RS-232C OUT S VIDEO
DC IN 12V
HD video monitor, etc.
OFF ON
DATA MIX
OFF ON
EXT SYNC IN
75
VIDEO RGB/COMPONENT
RGB/COMPONENT
Connecting cable with
D-sub 15-pin connectors
(commercially available)
to component video input
Connections
63