Rm-Br300 Remote Control Unit (Not Supplied) - Sony BRC-H900 Operating Instructions Manual

RM-BR300 Remote Control Unit
(not supplied)
This manual explains the operations of the RM-BR300
Remote Control Unit when it is used with BRC-H900
cameras.
Front
8 90qaqsqd
1
VALUE
LOCK
2
RESET
– +
R
PRESET
MODE
BRIGHT
3 SHIFT
– +
L/R
B DIRECTION
4
AUTO
FOCUS
AUTO
POWER
MANUAL
5
ONE PUSH
NEAR FAR AF
6
7
qhqjqk ql
A LOCK button and indicator
Press the LOCK button for more than one second,
the LOCK indicator lights and the values set by the
VALUE/R, BRIGHT/B and FOCUS controls are
locked. (The indicators of the locked controls are
turned off.) The AUTO/MANUAL button is also
disabled.
Press the LOCK button for more than one second
again to unlock the controls and buttons.
B VALUE/R control
When the brightness adjustment mode is
selected with the MODE button (with the
VALUE indicator lit):
Adjusts the value of the item (SHUTTER, IRIS or
GAIN) selected through the menu of the camera.
When the VALUE indicator is lit, the function of
the control varies according to the MODE setting in
the EXPOSURE menu of the camera. For details,
see "Functions of the VALUE and BRIGHT
controls" on page 53.
When the white balance adjustment mode is
selected with the MODE button (with the R
indicator lit):
The function of the control with the R indicator lit
varies according to the white balance mode selected
on the camera. For details, see "Functions of the R
and B controls" on page 52.
C BRIGHT/B control
When the brightness adjustment mode is
selected with the MODE button (with the
BRIGHT indicator lit):
Adjusts the brightness settings of the camera, etc.
When the BRIGHT indicator is lit, the function of
the control varies according to the MODE setting in
22
GB
Location and Function of Parts
qf qg
PANEL BLACK PAN-TILT ONE PUSH
MENU
LIGHT LIGHT RESET AWB
POSITION
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
STD REV
CAMERA
1 2 3 4 5 6 7
w;
the EXPOSURE menu of the camera. For details,
see "Functions of the VALUE and BRIGHT
controls" on page 53.
When the white balance adjustment mode is
selected with the MODE button (with the B
indicator lit):
The function of the control with the B indicator lit
varies according to the white balance mode selected
on the camera. For details, see "Functions of the R
and B controls" on page 52.
D MODE button
Press this button to select the function of the
VALUE/R control and BRIGHT/B control.
When the brightness adjustment mode is selected,
the VALUE and BRIGHT indicators are lit.
When the white balance adjustment mode is
selected, the R and B indicators are lit.
E FOCUS control
Turn this control counterclockwise (toward NEAR)
to focus on a near subject, and clockwise (toward
FAR) to focus on a far subject.
F AUTO/MANUAL button and AUTO indicator
Press this button to select focus mode, AUTO or
MANUAL.
When AUTO is selected, the AUTO indicator lights
and the FOCUS control and the ONE PUSH AF
button are disabled.
When MANUAL is selected, the FOCUS control
and the ONE PUSH AF button are enabled (with
the FOCUS indicator lit).
G ONE PUSH AF button
Press this button to perform the one-push auto focus
function.
H RESET button
Hold down this button and press one of the
POSITION buttons, and the memory of the camera
corresponding to the pressed POSITION button is
cleared to the factory-preset conditions.
When multiple cameras are connected, hold down
this button and press the POWER button to set the
camera addresses automatically.
Note
Some memory contents may not be erased even if
you use the RESET button.
For details about item erased by the RESET button,
see "Presetting Items" on page 78.