Sony BRC-Z330 Operating Instructions Manual page 79

Presetting menu items while the Interface Board is inserted into BRU-SF10 connected
with the camera
Menu item
Menu items displayed only
when the HFBK-SA1 is
installed
D-SUB OUTPUT 1
ADD SYNC
D-SUB OUTPUT 2
IMG SIZE
SETUP (not available for
50i output signal)
Menu items displayed only
when the HFBK-HSD2 is
installed
1)
IMG SIZE
1)
When installed in the BRC-Z330 and in use, the IMG SIZE setting is linked with the VIDEO OUT setting.
When two BRBK-SA1 cards are installed in the BRU-SF10, or when a BRBK-SA1 and BRBK-HSD2 are used as
SD-SDI, the IMG SIZE settings for both option cards are linked. When two BRBK-HSD2 cards are installed in the
BRU-SF10, or when a BRBK-SA1 and BRBK-HSD2 are used as SD-SDI, the IMG SIZE settings for both option
cards are linked.
: Setting items retained in memory when the power is turned off and on again. The camera starts with these settings.
z
a : Setting items retained in memory when the power is turned off and on again.
: Setting items retained in memory only when the power is turned on.
f
– : Setting items cleared from the memory when the power is turned off and on.
1 2 3 4 5
f – – – –
f – – – –
f – – – –
f – – – –
f – – – –
f – – – –
Presetting position number
6 7 8 9 10
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
11 12 13 14 15
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
Presetting Items
16
–
–
–
–
–
–
79