Storing The Camera Settings In Memory - Presetting Feature; Storing Camera Settings - Sony BRC-Z330 Operating Instructions Manual

3
Adjust the brightness with the VALUE or BRIGHT
control.
Turn toward – for
darkening the
picture by changing
shutter speed, gain
level or F-number.
Turn toward – for
darkening the picture
by changing exposure
compensation level,
F-number or gain
level.
Functions of the VALUE and BRIGHT controls
The functions of the VALUE control and the BRIGHT
control change according to the MODE setting in the
EXPOSURE menu, as follows:
MODE Function of
setting VALUE control
FULL AUTO Not used
SHUTTER Shutter speed
Pri control
IRIS Pri F-number control
GAIN Pri Gain control
MANUAL
Shutter speed
control
* When EX-COMP is ON in the EXPOSURE menu
52
Storing the Camera Settings in Memory – Presetting Feature
Turn toward + for
VALUE
brightening the picture
by changing shutter
speed, gain level or F-
number.
– +
R
MODE
BRIGHT
Turn toward + for
brightening the picture
by changing exposure
compensation level, F-
– +
number or gain level.
B
Function of BRIGHT
control
Exposure compensation
level control*
Exposure compensation
level control*
Exposure compensation
level control*
Exposure compensation
level control*
• F-number and gain
controls (when the
DIP switch 3 at the
bottom of the Remote
Control Unit is set to
ON)
• F-number control
(when the DIP switch
3 at the bottom of the
Remote Control Unit
is set to OFF)
Storing the Camera
Settings in Memory
– Presetting Feature
Up to sixteen combinations of settings (sixteen
positions), including camera position, zooming,
focusing, and backlighting, can be stored in the memory
of the camera using the RM-BR300 Remote Control
Unit.
For details of the camera settings to be preset, see
"Presetting Items" on page 77.

Storing Camera Settings

To select positions 9 to 16
While holding down the SHIFT button, press the
PRESET button (to store the settings) or the RESET
button (to cancel the settings). The lower indicator on
the SHIFT button will light and the POSITION 1 to 8
buttons can be used for positions 9 to 16.
When you release the SHIFT button, the upper indicator
lights and the POSITION 1 to 8 buttons can be used for
positions 1 to 8.
Lights for positions 1 to 8.
SHIFT
Lights for positions 9 to 16.
To store camera settings
4 1
RESET
VALUE LOCK
PANEL BLACK PAN-TILT ONE PUSH
LIGHT LIGHT RESET AWB
RESET
– +
R
PRESET POSITION
MODE
BRIGHT
1 2 3 4 5
SHIFT
9 10 11 12 13
STD REV
– +
L/R
DIRECTION
B
CAMERA
AUTO
FOCUS
AUTO 1 2 3 4 5
MANUAL POWER
ONE PUSH
NEAR FAR AF
4 2
1
Press the PAN-TILT RESET button to reset the pan/
tilt position.
2
Press the CAMERA button to select the camera
whose settings you want to preset.
3
Adjust the position, zooming, focusing and
backlighting of the camera. (See page 48 to 50.)
MENU
6 7 8
14 15 16
6 7