Connections; Connecting To An Ac Outlet; Connecting The Rm-Br300 Remote Control Unit - Sony BRC-Z330 Operating Instructions Manual

Connections

Connecting to an AC Outlet

Use the supplied AC power adaptor and AC power cord
to connect the camera to an AC outlet.
1 2 3 4 5 6 7 8 9 IR SELECT
1
2
3
VISCA RS-422
!
DC IN 12V
IN VISCA RS-232C OUT S VIDEO
DC IN 12V
AC power adaptor MPA-AC1 (supplied)
AC power cord (supplied)
62
Connections
OFF ON
DATA MIX
OFF ON
EXT SYNC IN
75
VIDEO RGB/COMPONENT
to AC outlet
Connecting the RM-BR300 Remote
Control Unit
Use the RS-232C connecting cable supplied with the
Remote Control Unit.
1 2 3 4 5 6 7 8 9 IR SELECT
1
2
3
VISCA RS-422
!
DC IN 12V IN VISCA RS-232C OUT S VIDEO
DC IN 12V
VISCA RS-232C IN
RS-232C cable*
VISCA RS-232C
RM-BR300 Remote
DC IN 12V
Control Unit
* supplied with the RM-BR300
Note
When using the VISCA RS-232C connectors, check that
the BOTTOM switch on the bottom of the camera
(page 20) and the DIP switch on the bottom of the
Remote Control Unit (page 25) are set to RS-232C.
OFF ON
DATA MIX
OFF ON
EXT SYNC IN
75
VIDEO
RGB/COMPONENT
AC power cord*
to AC outlet
AC power adaptor*