System Menu - Sony BRC-Z330 Operating Instructions Manual

VIDEO connector of the camera, and the SDI
OUTPUT connector of an optional Output Card, if one
is installed in a card slot.

SYSTEM Menu

< S Y S T E M >
> I R - R E C E I V E
I M G - F L I P
P A N R E V E R S E
T I L T R E V E R S E
D I S P L A Y I N F O
S Y N C M A S T E R
H P H A S E
IR-RECEIVE (infrared signal reception)
When it is set to OFF, the camera does not receive the
signal from the supplied Remote Commander.
Be sure to keep it ON when you use the supplied Remote
Commander.
Note
You cannot set IR-RECEIVE to OFF when you operate
the menu using the supplied Remote Commander. To set
it to OFF, use the RM-BR300 Remote Control Unit (not
supplied) or the VISCA command.
IMG-FLIP (image flip)
Set IMG-FLIP to ON to rotate the camera image
supplied from the RGB/COMPONENT connector,
S VIDEO connector,
the SDI OUTPUT connector on an optional Output Card
if one is installed in a card slot, upside/down and to
reverse the direction of the camera movement with pan/
tilt operations.
PAN REVERSE: Set to ON to reverse the horizontal
movement of the camera image.
TILT REVERSE: Set to ON to reverse the vertical
movement of the camera image.
When you set IMG-FLIP to ON, "Please restart
system!" appears. Turn off the power of the camera and
turn it on again.
Notes
• Regardless of the IMG-FLIP to ON/OFF setting,
images shot with the camera are accumulated for the
vertical synchronization period and output from the
RGB/COMPONENT connector,
connector, VIDEO connector of the camera, and
the SDI OUTPUT connector on an optional Output
Card, if one is installed in a card slot.
• When you set IMG-FLIP to ON, then turn off the
camera and turn it on again, PAN REVERSE and
TILT REVERSE will be set to ON. When you set
O N
O F F
O F F
O F F
O N
H D
1 0
VIDEO connector, and
S VIDEO
37
SYSTEM Menu