Sony BRC-Z330 Operating Instructions Manual page 10

BRBK-HSD2 HD/SD-SDI Output Card
Insert the card into the camera to allow output of an
HD-SDI signal conforming to SMPTE292M serial
digital interface standards, or output of an SD-SDI
signal conforming to SMPTE259M serial digital
interface standards. An audio signal is not output from
the card.
BRBK-SA1 Analog SD Output Card
The board allows output of an SD analog video signal
such as the composite video, S video, component video
and RGB signals.
BRU-SF10 HD Optical Multiplex Unit
The HD Optical Multiplex Unit allows a connection up
to of 2,000 m (6,562 feet) using the CCFC-S200 2- core
optical fiber cable.
Supplied accessories: AC adapter (1), power cord (1),
DC-cable secure connection attachment (1), RS-232C
connecting cable (3 m) (10 feet) (1), RS-422 connector
plug (1)
10
System Components
CCFC-S200 Optical Fiber Cable
This is a 2-core single-mode optical fiber cable of 2,000
m (6,562 feet) long.
Supplied accessories: extension plug (1)
Video Switcher (commercially available)
It switches the video signal input of multiple cameras.
BRS-200 Remote Camera Operating Switcher
This switcher can be used as a camera control, allowing
camera operation such as pan/tilt and zoom operations.
The switcher also allows switching of video signals
input from multiple cameras.
Supplied accessories: AC power cord (1), AC power
adaptor (1), AC power cord for AC power adaptor (1),