Connecting A Network Interface Cable - MUTOH Valuevet VJ-1638 Operation Manual

VJ-1638/1638W OPERATION MANUAL
3.7.3

Connecting a network interface cable

This section explains how to connect a network interface cable.
Follow the procedure below to connect this printer to your PC.
NOTE
• When connecting the printer and computer via the hub, use a straight cable.
• When connecting the printer and computer Peer-to-Peer, use a crossover cable.
1. Turn OFF both the printer and PC.
2. Insert the network interface cable into the network interface connector located on the back of the
printer.
No.
1
2
3. Connect the other connector of the network interface cable to your PC.
TIP
• About connecting to your PC, refer to the operation manual included with the PC.
• For network setting of the printer, refer to the following.
5.1.23 IP Address menu
5.1.24 Subnet Mask menu
5.1.25 Gateway menu
Network interface cable
Network interface cable connector
1
Name
3-99
3 Before using
2