Standard Confirmation Pattern - MUTOH Valuevet VJ-1638 Operation Manual

3 Before using
2. Perform rough adjustment when the degree of misalignment is big.
3.6.1.2 Standard rough adjustment pattern
Perform micro adjustment when the degree of misalignment is small.
3.6.1.3 Standard micro adjustment pattern
NOTE
• Perform rough adjustment first when the degree of misalignment is difficult to determine.
3. Print out the confirmation pattern again and check if the printer has been adjusted properly.

3.6.1.1 Standard confirmation pattern

4. If it has not been adjusted yet, return to step 2.
NOTE
• Perform micro adjustment if the printer is not fully adjusted after rough adjustment.
3.6.1.1 Standard confirmation pattern
Print out the confirmation pattern of the print mode in the user type setting which is currently set.
1. Turn ON the printer and load the roll media.
3.4.2 Setting Roll Media
2. Display the Adjust Print menu on Operation panel.
a. Press the [Menu] key on Operation panel.
• "Menu1: Setup>" is displayed on Operation panel.
VJ-1638/1638W OPERATION MANUAL
3-64