Changing The Angle Of Ink Cartridge Slot; When Inserting Ink Cartridges Vertically - MUTOH Valuevet VJ-1638 Operation Manual

VJ-1638/1638W OPERATION MANUAL
CAUTION
• Comply strictly with the following during ink filling. If filling is interrupted, ink
will be lost when filling is resumed.
• Do not turn OFF the power of the printer.
• Do not unplug the power cord set of the printer.
• Do not open Front cover.
• Do not open Maintenance cover.
• Do not raise Media loading lever.
NOTE
• If the printer perform the nozzle check printing immediately after the initial ink replenishment
is complete, the following results may occur.
• Printed lines become blurred.
• The data is partially not printed.
In such cases, follow "5.3 Cleaning menu" and refill a small amount of ink. Then, check the
printing result.
If there is no improvement in the print result even after refilling a small amount of ink, leave
the printer unused for an hour or more. Then, refill a small amount of ink again and check the
print result.
If there is still no improvement, contact your local MUTOH dealer.
3.3.3

Changing the angle of Ink cartridge slot

The angle of the ink cartridge slot of this printer varies depending on the capacity of ink cartridges (or
ink packs).
Follow the procedure below to change the angle.
3.3.3.1

When inserting Ink cartridges vertically

Before installing the 440ml cartridges, change the angle as follows.
3-29
3 Before using