Table of Contents
Advertisement
Installation guide
Function test of the GAL signal, reverse signal, internal sensors
(SE:+J'jF:;<)
0
In the Service Mode, select SE34XRS using the right rotary
knob 0 and press to confirm.
0
Move the vehicle several feets forwards or backwards for the GAL
signal function test.
e
The number after lJ-lE~E:i:~ should increase (even at a low
speed).
The number after 1.J l-l E: E, L. : should not increase if idling or
pressing the accelerator when the vehicle is parked.
0
Engage the reverse gear for the reverse signal function test.
w
The number after l?Er...iEF:Et':: should change from 0 to 1 (1
to i::i ).
l
Drive around a corner to test the function of the internal sensors.
e
The values after Xi and '4: should change.
In order to quit the sensor test, press the @ . button. The unit switches
back to the Service Mode.
Subject to correction and technical modifications
21
Copyright by Becker GmbH, D-76303 Karlsbad
Advertisement
Table of Contents
