Installation guide
The number of wheel impulses per wheel revolution (if known) can then
be selected by turning the right rotary knob 0 and pressing to confirm.
w
If the number of wheel impulses per wheel revolution is not
: : : : : *.- : : .-. : : : :
known, i._ri'.:!i"...~'.~!.,i~.:.i~.l
must be selected. It is then not possible
to enter tire data.
The previously entered data is displayed again. If the data entered is cor-
rect select line with data by turning the right rotary knob 0 and then
press to conf?rm.
If correction is necessary, select PXK:! IF"? by turning the right rotary
knob 0 and press to confirm. The values can then be re-entered.
Once the previously entered data has been confirmed, the tire data can
be entered or self-calibration can be started.
To enter the tire data, select T--]F:::~.,i"~
"r IRE, i...i~~L..,i.,lE:i~EI
by
turning
the
right
rotary knob 0 and press to confirm.
Enter the correct tire size using the right rotary knob and confirm the en-
try by pressing for more than 2 seconds.
w
The letter "R" cannot be entered. 3 numbers must be en-
tered before and after the slashes. Insert a "0" for any miss-
ing numbers.
Example: Specification in vehicle registration papers: 185/
55R15 81T
Input into unit: 185/055/O 15
Then select between /G:!,~ "I" :[$I "7' F::r E: i-i C:> and i.j 2:; [:I e:>
; ::
"r :[ F;r Ef: "/" Fr E: i:i 61
by
turning the right rotary knob 0 to enter the approximate tread depth value.
Subject to correction and technical modifications
19
Copyright by Becker GmbH, D-76303 Karlsbad